Dold 0029006, EAN: 4030641290061

Dold 0029006 time relay delayed release 110V

Industrial Material > Industrial relays and contactors > Industrial Timers

Dold 0029006 time relay delayed release 110V

Lieske Part No. 1583540
Mfg Part No 0029006
EAN-Code 4030641290061
Manufacturer Dold
Here only 321,19 EUR
382,22 EUR incl. VAT

Further information for Dold 0029006 time relay delayed release 110V

Technical data
Enclosure designFront panel mounting
Output contacts1 C/O contact
Time function(s)Off-delay, with control signal
Width72 mm
TypeEF 7666
Variant
Contact equipping1 changeover contact delayed, 1 changeover undelayed
Nominal voltageAC 110 V
Time range0,15 s - 30 h
The Dold time relay EF7666.32 is a delayed-release industrial time relay for front panel mounting, designed for a rated voltage of AC 110 V and a frequency of 50/60 Hz. It is used for time-delayed control of electrical devices and system components, particularly to account for coast-down behavior, as occurs with motors or pumps. The function is based on a purely mechanical timing mechanism, which is adjusted via a continuously variable rotary switch on the front side. The time delay can be set within a range of 0.15 seconds to 30 hours, with six switchable time ranges available. Adjustment is made using a black or white indicator pointer on an absolute scale, enabling precise and easy operation.

Applications
This device is designed for industrial applications where controlled, time-delayed switching off is required. Typical applications include motor control, fan shutdown after the stoppage of an assembly, or delay of switching operations in automation systems. The delayed release ensures that the output contacts only leave the switching state after the set time has elapsed, even if the control signal has already been switched off.

Functions and Features in Detail
The time relay features two output contacts: one delayed changeover contact and one instantaneous changeover contact. The delayed contact switches only after the set delay time has elapsed, while the instantaneous contact reacts immediately when the control signal is applied. The contacts are made of AgNi with a gold layer of 0.2 μm, ensuring high switching capacity and long service life. The rated operating voltage is AC 250 V, and the contacts can switch up to 3 A at AC 230 V (AC 15). The electrical service life is 100,000 switching operations at 3 A and 500,000 switching operations at 1 A. The mechanical service life exceeds 30 million switching operations or 15,000 operating hours.

Technology Explained Simply
The time delay is generated by a mechanical timing mechanism, controlled via a continuously adjustable rotary switch on the front side. The repeatability accuracy is ≤ ± 0.5 % of the scale end value, with time ranges of 3 and 6 seconds having ≤ ± 1 %. The reset time is < 150 ms, ensuring the device is quickly ready for operation again. The contact response time is under 35 ms, and the release time is under 60 ms. The zero-voltage hold feature ensures the relay remains in its last position during voltage failure, which is important for safety in control systems. A time delay indicator and a switching position indicator (except for EH 7666) support visual monitoring of the operating status.

Compatibility and Accessories
The device is designed for use in industrial control systems and enclosures. It has a width of 72 mm and a front surface of 72 x 72 mm, making it suitable for standard control panels. The front side is spray water protected and meets protection class IP 65, allowing use in outdoor or damp environments. The input voltage is AC 110 V, with a voltage range between 0.8 and 1.1 times the rated voltage. The rated frequency is switchable for 50/60 Hz. The maximum short-circuit withstand requires a fuse with a maximum of 10 A gG/gL.

Mounting and Installation
The time relay is mounted in front panels, with installation carried out via the provided connection terminals. The terminals are designed for connection with cables, and the terminal designations are detailed in the datasheet. The delay time is adjusted directly on the front side using the rotary switch. The devices are designed for use in enclosures and control systems, with mounting in a closed housing recommended to maintain the IP 65 protection rating.

Operational Advantages
The combination of wide adjustment range, high repeatability accuracy, and mechanical robustness makes this device a reliable solution for time-controlled applications. The simple operation via continuous adjustment and the visual indication of switching position facilitate commissioning and maintenance. The zero-voltage hold feature and short reset time enhance safety and efficiency in industrial control systems. The IP 65 protection class allows flexible installation options, even in damp or dusty environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1583540
qrcode für Dold 0029006 time relay delayed release 110V