| Technical data |
| Enclosure design | Front panel mounting |
| Output contacts | 1 C/O contact |
| Time function(s) | Off-delay, with control signal |
| Width | 72 mm |
| Type | EF 7666 |
| Variant |
| Contact equipping | 1 changeover contact delayed, 1 changeover undelayed |
| Nominal voltage | AC 240 V |
| Time range | 0,15 s - 30 h |
The Dold time relay EF7666.32 is a drop-out delayed industrial time relay for front panel mounting, designed for a rated voltage of AC 240 V at a frequency of 50/60 Hz. It is used for time-delayed control of electrical devices and system components, particularly to account for coast-down behavior, as occurs with motors or pumps. The delay time can be continuously adjusted within a range of 0.15 seconds to 30 hours, with six selectable time ranges accessible via a front-mounted rotary switch. The time function operates according to the drop-out delay principle with control signal, in accordance with standard EN 61812-1. The repeatability is ≤ ± 0.5 % of the scale end value, with a deviation of ≤ ± 1 % permitted in the range of 3 and 6 seconds.
Applications
This device is suitable for industrial control tasks where a defined delay is required upon switching off. Examples include controlled shutdown of motors, signal delay in automation systems, or ensuring sufficient cooling time in machinery. The zero-voltage protection ensures that the relay does not switch unexpectedly in the event of a voltage drop, enhancing the safety and reliability of the system.
Functions and Features in Detail
The time relay features contact configuration with one delayed changeover contact and one instantaneous changeover contact. The contacts are made of AgNi with a gold plating of 0.2 μm, ensuring high switching capacity and long service life. The rated operating voltage is AC 250 V, and the response time of the contacts is under 35 ms. The drop-out time is < 60 ms, enabling a rapid response in case of voltage failure. The time progression indicator and the switching position indicator (except for EH 7666) support visual monitoring of the operating status.
Technology Explained Simply
The time control is purely mechanical, operated via a rotary switch with an absolute scale that can be continuously adjusted. The delay time is determined by the switch setting and the selection of the corresponding time range. The reset time is less than 150 ms, meaning the device is quickly ready for operation again after a shutdown. The mechanical life exceeds 30 million switching operations or 15,000 operating hours, indicating high robustness.
Compatibility and Accessories
The relay is designed for use in industrial control systems and can be combined with other devices from the MINITIMER series, such as models AA 7666, EC 7666, and EH 7666. The front face is splash-proof and meets protection class IP 65, enabling use in outdoor or humid environments. The width is 72 mm, and the front surface measures 72 x 72 mm, allowing standard mounting in enclosures.
Mounting and Installation
The device is mounted in front panels, with connection terminals provided for input/output voltage and control signals. Mounting is done by securing to the front plate, with electrical connections made at terminals A1/A2 (input voltage) and B1/B2 (control signal), as well as at contacts 15-16, 27-28 (delayed) and 31-32, 43-44 (instantaneous). The delay time is adjusted using the front-mounted rotary switch.
Operational Advantages
The combination of wide adjustment range, simple operation, and high repeatability makes this device a reliable solution for time-controlled applications. The zero-voltage protection and mechanical robustness enhance operational safety. The IP 65 protection class allows flexible installation options, even in humid or dusty environments. The switching position indicator facilitates maintenance and diagnostics during operation.