Dold 0027144, EAN: 4030641271442

Dold 0027144 undervoltage relay BA9043 3/N AC50-400Hz 57/100V

Dold 0027144 undervoltage relay BA9043 3/N AC50-400Hz 57/100V

Lieske Part No. 1153812
Mfg Part No 0027144
EAN-Code 4030641271442
Manufacturer Dold
Here only 262,20 EUR
312,02 EUR incl. VAT

Further information for Dold 0027144 undervoltage relay BA9043 3/N AC50-400Hz 57/100V

Technical data
1- / 3-phase3
Auxiliary voltageWithout
Enclosure designSwitch cabinet
Nominal voltage max.3/N AC 690 / 400 V
Output contacts2 C/O contacts
Width45 mm
TypeBA 9043
Operate delayYes
Variant
Contact equipping2 changeover contacts
Nominal voltage3/N 57/100 V
Time delaywithout
Approvals and MarkingsUKCA, CCC
VariantFor 3p4w systems
The under-voltage relay BA 9043 from Dold is a 3-phase monitoring device for three-phase networks with neutral conductor. It is designed for continuous monitoring of the network voltage and reacts to under-voltage by switching the output contacts. The device is rated for nominal voltages of 3/N AC 57/100 V and can monitor network voltages up to 3/N AC 690/400 V. Measurement is performed via arithmetic mean calculation, with each phase measured against the neutral conductor. Device settings are adjusted via rotary potentiometers on the front panel, allowing the pickup and drop-out values to be continuously adjusted between 0.85 and 1.05 of the nominal voltage, with a hysteresis of 0.75 to 0.95 of the pickup value. The device operates on the standstill current principle, where the output relay is not activated in the event of a fault, ensuring safe and reliable operation.

Applications

The BA 9043 is designed for use in industrial and railway applications where reliable voltage monitoring is required. It is suitable for networks with frequencies from 50 to 400 Hz and is designed for continuous operation. The operating temperature range is from -20 °C to +60 °C, and the storage temperature range is from -25 °C to +60 °C. The maximum operating altitude is 2000 m above sea level. The devices are designed for use in enclosures and comply with the standard IEC/EN 60255-1.

Functions and Equipment in Detail

The relay features two changeover contacts as output contacts, rated for switching operations with a thermal current of up to 6 A per contact. Switching capacities are 2 A/AC 230 V for make contacts and 1 A/AC 230 V for break contacts according to AC 15, as well as 1 A/DC 24 V according to DC 13. The electrical life expectancy is at least 200,000 switching cycles at 3 A and AC 230 V, and the mechanical life expectancy exceeds 30 million switching cycles. Indication is provided via LEDs: a red LED indicates operational readiness, and a green LED signals the status of the output relay. The device is insensitive to harmonics, ensuring stable operation even with distorted voltage waveforms.

Technology Explained Simply

Voltage monitoring is performed by measuring each phase against the neutral conductor and calculating the arithmetic mean. When the voltage drops below the set pickup value, the relay switches the output contacts. The pickup delay is active, but in this variant, there is no time delay. The switching delay is defined in the curve but is not adjustable. The maximum overload capacity is 1.2 times the nominal voltage continuously. The nominal power consumption is 4 VA. The setting accuracy is ≤ ±10 %. The devices are designed for use in environments with overvoltage category III and have a rated impulse withstand voltage of 6 kV at pollution degree 2.

Compatibility and Accessories

The BA 9043 is designed for networks with a neutral conductor. It is not intended for networks without a neutral conductor (3p3w). The devices are designed for mounting on DIN rail (IEC/EN 60715). The terminals are rated for 2 x 2.5 mm² solid or 2 x 1.5 mm² stranded cable with heat-shrink tubing. Mounting is done using plus-minus screws M3.5 with self-releasing clamp lever. The certifications UKCA and CCC are present.

Mounting and Installation

Mounting is on DIN rail inside the enclosure. The connection terminals are designed for connection with solid or flexible conductors. Dimensions are 45 mm width, 73 mm height, and 132 mm depth. Mounting screws should be tightened with a torque of 0.8 Nm. Wiring is to be done according to the specifications in the datasheet, with terminals L1, L2, L3 and N designated for the network supply line and contacts 11-14 and 21-24 for the output contacts.

Operational Advantages

The BA 9043 enables preventive maintenance through early detection of voltage anomalies. Rapid fault localization reduces downtime and increases productivity. Simple operation via rotary potentiometers on the front panel reduces installation and maintenance time. LED indicators provide a quick visual overview of the operating status. Harmonic insensitivity ensures reliable operation even in networks with high harmonic loading. Compliance with the standard IEC/EN 60255-1 ensures the quality and reliability of the device.

Enclosure Design

The device is designed in enclosure format with a width of 45 mm. The front panel is equipped with adjustment knobs and LED indicators. The terminals are located at the bottom of the device. The construction is designed for use in industrial environments and meets the requirements for protection class IP20 (not explicitly stated, but typical for enclosure devices). The devices are designed for use in environments with electromagnetic compatibility (EMC) according to IEC/EN 61000-4-2, -4-3, -4-4 and -4-5.

Certifications and Markings

The device carries the certifications UKCA and CCC. Compliance with the standard IEC/EN 60255-1 is given. The devices are suitable for use in railway applications, meeting the specific requirements according to DIN EN 50155. Vibration and shock resistance corresponds to category 1, class B according to IEC/EN 61373. The operating temperature class OT1 is complied with; OT2, OT3 and OT4 are possible with restrictions.

Application Examples

The BA 9043 is used in industrial plants such as production lines, pump stations, lighting systems, and railway installations where reliable voltage monitoring is required. The devices are suitable for use in environments with high mechanical loads and electromagnetic interference. Simple installation and maintenance make them a reliable solution for voltage monitoring in three-phase networks with neutral conductor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1153812
qrcode für Dold 0027144 undervoltage relay BA9043 3/N AC50-400Hz 57/100V