| Technical data |
| Enclosure design | Front panel mounting |
| Output contacts | 1 C/O contact |
| Time function(s) | Off-delay, with control signal |
| Width | 72 mm |
| Type | EF 7666 |
| Variant |
| Contact equipping | 1 NO contact undelayed, 1 NO contact delayed, 1 NC contact undelayed, 1 NC contact delayed |
| Nominal voltage | AC 110 V |
| Time range | 0,2 s - 60 h |
The Dold time relay EF7666.24 is a delayed-release industrial time relay for front panel mounting, designed for a rated voltage of AC 110 V and a time range from 0.2 seconds to 60 hours. It belongs to the MINITIMER series and is used for time-controlled operation of plant components, particularly to account for coast-down behaviour, as occurs with motors or other mechanical systems. The delay occurs after switching off the control signal, with the contacts only switching after the set time has elapsed. The time function complies with standard EN 61812-1 and is thus suitable for industrial applications.
Applications
This device is used in industrial control systems where controlled delay upon switching off is required. Examples include the control of fans, pumps or motors, where immediate switching off could cause damage. The delayed release enables a gentle shutdown and protects the system from mechanical or thermal stress. The front panel mounting design makes it ideal for installation in enclosures or control cabinets.
Functions and Equipment in Detail
The time relay features contact configuration with one un-delayed close contact, one delayed close contact, one un-delayed open contact, and one delayed open contact, corresponding overall to an output contact type of 1 changeover. The delay time is continuously adjustable via a rotary switch on the front, with six switchable time ranges available. Adjustment is made using an absolute scale with an indicator pointer, enabling precise and repeatable settings. The repeatability accuracy is ≤ ± 0.5 % of the scale end value, and for times of 3 and 6 seconds, ≤ ± 1 %. A time progress indicator and a switching position indicator (except for the EH 7666 variant) support visual monitoring of the operating status.
Technology Explained Simply
The time delay is based on a purely mechanical principle, requiring no electronic components. The delay is generated by a mechanical clockwork function, adjusted via a control knob. The zero-voltage safety ensures that the relay immediately returns to its rest state in case of power failure, increasing the safety of the system. The response time of the contacts is less than 35 ms, and the release time is less than 60 ms, enabling fast reaction to operating signals. The thermal load capacity is 4 A, and the switching capacity corresponds to standard AC 15 with 3 A at AC 230 V.
Compatibility and Accessories
The device is designed for use in enclosures with a width of 72 mm. The front panel is protected against spray water and complies with protection class IP 65, making it suitable for use in damp or dusty environments. The input voltage is AC 110 V at a nominal frequency of 50/60 Hz, with a voltage range between 0.8 and 1.1 times the nominal voltage. The electrical service life is at least 100,000 switching operations at 3 A and AC 230 V, and at least 500,000 switching operations at 1 A and AC 230 V. The mechanical service life exceeds 30 million switching operations or 15,000 operating hours.
Mounting and Installation
The time relay is mounted in front panel inserts, with the front surface measuring 72 mm × 72 mm. The connection terminals are designed for connection to cables, with a maximum fuse rating of 10 A gG/gL. Mounting is done by securing to the front panel, with the delay time adjustment performed directly on the front. The connection designations are A1/A2 for operating voltage and B1/B2 for the control signal, with contacts designated 15/16, 27/28, 31/32, and 43/44.
Operational Advantages
The continuous adjustment of the delay time over a wide range from 0.2 seconds to 60 hours allows flexible adaptation to different requirements. The mechanical design ensures high reliability and low maintenance. The IP 65 protection class protects the device against spray water and dust, making it suitable for industrial environments. The zero-voltage safety increases the safety of the entire control system, and the clear indication of switching position and time progress simplifies maintenance and diagnostics.