| Technical data |
| Enclosure design | Front panel mounting |
| Output contacts | 1 C/O contact |
| Time function(s) | Off-delay, with control signal |
| Width | 72 mm |
| Type | EF 7666 |
| Variant |
| Contact equipping | 1 NO contact undelayed, 1 NO contact delayed, 1 NC contact undelayed, 1 NC contact delayed |
| Nominal voltage | AC 230 V |
| Time range | 0,15 - 1000 s |
The Dold time relay EF7666.24 is a delayed-release industrial time relay for front panel mounting, designed for a rated voltage of AC 230 V and a frequency of 50/60 Hz. It is used for time-delayed control of electrical systems and machines, particularly to account for the coast-down behavior of motors or other system components. The time function operates on the principle of delayed release with control signal, where the delay begins after switching off the control voltage. The EF 7666 device family belongs to the MINITIMER series and features a purely mechanical timing mechanism, which is adjusted via stepless rotary switches on the front panel.
Applications
This time relay is designed for industrial applications requiring precise, time-controlled switching off. Typical applications include controlling fans, pumps, lighting systems, or other electrical loads where immediate switching off is not desired. The delay function allows the load to continue operating for a defined period after the control signal is switched off. The front panel is protected against spray water (IP 65), enabling use in damp or dusty environments, such as in the food industry or outdoor applications.
Functions and Equipment in Detail
The device features contact configuration with one instantaneous closer, one delayed closer, one instantaneous opener, and one delayed opener, equivalent to a changeover contact. The time delay can be set within a range of 0.15 to 1000 seconds, with six switchable time ranges selectable via the front panel. Adjustment is stepless via an indicator pointer on an absolute scale. Repeatability is ≤ ± 0.5 % of the scale end value, with a permissible deviation of ≤ ± 1 % in the 3 and 6 second ranges. A timing indicator shows the progress of the delay period, and a switch position indicator displays the state of the contacts.
Technology Explained Simply
The timing mechanism is based on a purely mechanical principle, requiring no electronic components. The delay is generated by a mechanical clockwork mechanism, regulated via an adjustment knob on the front panel. Contacts operate with an actuation time of less than 35 ms and a release time of less than 60 ms. The device is voltage failure safe, meaning it returns to the off state when the supply voltage is interrupted. The rated operating voltage of the contacts is AC 250 V, and the device is designed for a thermal current of 4 A.
Compatibility and Accessories
The time relay is designed for use in control systems and switchgear that operate with AC 230 V supply voltage. It is compatible with other devices in the MINITIMER series, such as AA 7666, EC 7666, or EH 7666, although the respective widths and front panel areas may vary. The width is 72 mm, and the front panel measures 72 x 72 mm. The devices comply with the EN 61812-1 standard for time relays.
Mounting and Installation
The device is mounted into a front panel using the designated mounting elements. The terminal clamps are designed for connection to wires, and control is via terminals A1/A2 for supply voltage and B1/B2 for the control signal. Adjustment of the delay time is performed directly on the front panel without tools.
Advantages in Operation
The stepless adjustment of delay time over a wide range allows flexible adaptation to different requirements. The mechanical design ensures high reliability and long service life, with a mechanical life of over 30 million switching operations. Voltage failure safety ensures safe operation, and the IP 65 protection rating allows use in demanding environments. The switch position indicator facilitates maintenance and diagnostics during operation.