Dold 0025863, EAN: 4030641258634

Dold 0025863 MK9052.12 AC50/60HZ 110V thermistor motor protection relay

Dold 0025863 MK9052.12 AC50/60HZ 110V thermistor motor protection relay

Lieske Part No. 1002254
Mfg Part No 0025863
EAN-Code 4030641258634
Manufacturer Dold
Here only 153,82 EUR
183,05 EUR incl. VAT

Further information for Dold 0025863 MK9052.12 AC50/60HZ 110V thermistor motor protection relay

Technical data
ClassificationThermistor-Motorschutz
Enclosure designSwitch cabinet
Measuring range max.> 3 kΩ
Output contacts2 C/O contacts
Width22,5 mm
TypeMK 9052
Variant
Auxiliary voltageAC 110 V
Contact equipping2 changeover contacts
The Dold MK9052.12 AC50/60HZ 110V is a thermistor motor protection relay used to prevent thermal motor overloads in industrial plants. It monitors the temperature of electric motors using special cold conductors (PTC resistors) and switches off the motor when a critical resistance value is reached. The device operates on the rest current principle, whereby the output relay is not activated in the event of a fault, ensuring a safe shutdown. The auxiliary voltage is AC 110 V, and the contact configuration includes 2 changeover contacts, which can be used to control auxiliary circuits or warning signals. The width of 22.5 mm allows for compact mounting in enclosures on a DIN rail.

Applications
This motor protection relay is designed for use in plants where motors may be thermally overloaded due to high switching frequency, heavy start-up, single-phase operation, impaired cooling, or high ambient temperature. It is particularly used in industrial automation, pump and fan installations, and machine tool applications where reliable temperature monitoring is required. The number of connected thermistors can be up to six, with the sensors connected in series. The measurement range limit is defined by a maximum resistance of > 3 kΩ, with a pickup value of ≥ 3 kΩ and a drop-out value of ≤ 1.8 kΩ.

Functions and Features in Detail
The device includes a wire break detection feature in the sensor circuit, ensuring that a defective or broken temperature sensor is detected and preventing malfunction. An LED indicates the relay’s switching state, allowing the operating condition to be visually checked. The contact configuration with 2 changeover contacts enables control of multiple auxiliary circuits, for example, to operate warning lights or signal to a higher-level control system. The output contacts are rated for a switching current of 3 A at AC 230 V, with an electrical life of 800,000 switching operations at 3 A and AC 230 V.

Technology Explained Simply
The relay operates with a measurement circuit that generates a measurement voltage of approximately 1.2 V at a resistance of 1.5 kΩ and has a measurement circuit load of approximately 1 mW. The auxiliary voltage is supplied via terminals A1/A2, with a nominal frequency of 50/60 Hz. The pickup delay is < 20 ms and the drop-out delay is < 15 ms, which is very short, enabling rapid response to temperature changes. The mechanical life exceeds 20 million switching operations, indicating high robustness. The operating temperature range extends from -20 °C to +60 °C, making the device suitable for use in demanding climatic environments.

Compatibility and Accessories
The relay is compliant with IEC/EN 60947-8 and can be operated with thermistors or bimetal contacts. The terminals are designed for conductor cross-sections of 2 x 2.5 mm² solid or 2 x 1.5 mm² stranded wire with ferrules according to DIN 46228-1/-2/-3/-4. Mounting is done on a DIN rail according to IEC/EN 60715. The enclosure protection rating is IP 40, and the terminals are rated IP 20, providing protection against touch and dust, but not against water. Electromagnetic compatibility conforms to standards IEC/EN 61000-4-2 to -4-6, enabling safe operation in electromagnetically noisy environments.

Mounting and Installation
Mounting is done on a DIN rail inside the enclosure. The connection terminals are clearly labeled: A1/A2 for operating voltage, P1/P2 for thermistor input, and changeover contacts 11/12/14 and 21/22/24. The tightening torque for the terminals is 0.4 Nm. The device dimensions are 22.5 mm width, 82 mm height, and 99 mm depth. The operating altitude is limited to below 2000 m. Vibration resistance has been tested according to IEC/EN 60068-2-6 with an amplitude of 0.35 mm and a frequency of 10 to 55 Hz.

Operational Advantages
The relay provides reliable temperature monitoring with fast response time and integrated wire break detection. Its compact design and DIN rail mounting simplify installation in existing enclosures. The high mechanical and electrical life ensures long-term operation with minimal maintenance. Compliance with IEC/EN 60947-8 and EMC testing according to IEC/EN 61000-4-2 to -4-6 guarantee safe and interference-free operation in industrial applications. The LED indication of contact position allows for easy visual inspection of the operating status.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002254
qrcode für Dold 0025863 MK9052.12 AC50/60HZ 110V thermistor motor protection relay