| Technical data |
| Enclosure design | Front panel mounting |
| Output contacts | 1 C/O contact |
| Time function(s) | Off-delay, with control signal |
| Width | 72 mm |
| Type | EF 7666 |
| Variant |
| Contact equipping | 1 NO contact undelayed, 1 NO contact delayed, 1 NC contact undelayed, 1 NC contact delayed |
| Nominal voltage | AC 230 V |
| Time range | 0,2 s - 60 h |
The Dold time relay EF7666.24 is a delayed-release industrial time relay for front panel mounting, designed for a rated voltage of AC 230 V and a frequency of 50/60 Hz. It is used for time-delayed control of electrical devices and system components, particularly to account for the coast-down behavior of motors or other mechanical systems. The device allows for continuous adjustment of the delay time in the range of 0.2 seconds to 60 hours, with six switchable time ranges adjustable via a rotary switch on the front. The time function operates on the principle of delayed release with control signal, in accordance with standard EN 61812-1, whereby the contacts only return to their original position after the set time has elapsed once the control signal is removed.
Applications
This time relay is designed for industrial applications requiring precise time-controlled switching off. Typical applications include controlling fans, pumps, lighting systems, or other equipment that must continue operating for a defined period after the main signal is switched off. The zero-voltage safety ensures that the device remains in its output position in the event of a power failure, which is important for safety in production facilities.
Functions and Equipment in Detail
The device features contact configuration with one instantaneous closer, one delayed closer, one instantaneous opener, and one delayed opener, corresponding to an output contact type of 1 changeover. The contacts are made of AgNi + 0.2 μm Au contact material, ensuring high switching capacity and long service life. The response time of the contacts is less than 35 ms, and the release time is less than 60 ms. The repeatability is ≤ ± 0.5 % of the scale end value, with an allowable deviation of ≤ ± 1 % in the range of 3 and 6 seconds. A time progress indicator enables visual monitoring of the time elapsed, and a switching position indicator shows the current state of the contacts.
Technology Explained Simply
The time control is purely mechanical, operated via a continuously adjustable rotary switch positioned on an absolute scale. The delay time is determined by the position of the adjustment pointer on the scale, with the time ranges selected via a switch on the front panel. The width of the device is 72 mm, and it is designed for front panel mounting. The front of the EF7666 is protected against spray water and meets protection class IP 65, allowing use in outdoor or damp environments. The rated operating voltage is AC 250 V, and the device is designed for a thermal current of 4 A.
Compatibility and Accessories
The time relay is designed for use in industrial control systems and switchgear. It is compatible with standard control panels and can be used in combination with other devices from the MINITIMER series (e.g. AA 7666, EC 7666, EH 7666). The connection terminals are designed for wiring, and the maximum fuse rating is 10 A gG / gL. The electrical service life is at least 100,000 switching operations at 3 A and AC 230 V, and at least 500,000 switching operations at 1 A. The mechanical service life exceeds 30 million switching operations or over 15,000 operating hours.
Mounting and Installation
The device is installed in a front panel with a mounting width of 72 mm. Mounting is done by securing it to the panel, with connection terminals provided for connecting control and load lines. The delay time is adjusted via the front-mounted rotary switch, which selects the time ranges and sets the exact time using the absolute scale. The switching position indicator and time progress indicator facilitate commissioning and maintenance.
Advantages in Operation
The continuous adjustment of the delay time over a wide range from 0.2 seconds to 60 hours offers flexibility for adapting to different applications. The high repeatability and zero-voltage safety increase reliability. The IP 65 protection class allows use in harsh environments. The mechanical construction without electronic components ensures high robustness and long service life. Front-side adjustment and visual indicators simplify operation and maintenance during use.