| Technical data |
| Enclosure design | Front panel mounting |
| Output contacts | 1 C/O contact |
| Time function(s) | On-delay |
| Width | 72 mm |
| Type | EF 7616 |
| Variant |
| Contact equipping | 1 NC contact delayed, 1 NC contact undelayed, 1 NO contact delayed, 1 NO contact undelayed |
| Nominal voltage | AC 24 V |
| Time range | 0,2 s - 60 h |
The Dold time relay EF7616.24 is a delayed-actuation industrial time relay for front panel mounting, designed for a rated voltage of AC 24 V and a time range from 0.2 seconds to 60 hours. It belongs to the MINITIMER series and is used for time-controlled operation of devices and system components, for example, to account for the startup behavior of motors. The delay time is adjusted via stepless rotary switches on the front, with six switchable time ranges available. The time function operates purely mechanically, ensuring high repeatability of ≤ ± 0.5 % (≤ ± 1 % in the 3 and 6 second ranges). The front of the device is protected against splashing water and meets protection class IP 65, enabling use in outdoor or humid environments.
Applications
The time relay is suitable for applications requiring a time-delayed switching function, such as in automation technology, machine control, or building automation. Typical use cases include delayed switching of pumps, fans, or lighting systems to avoid load peaks or extend component lifespan. The ability to adjust the delay time steplessly over a wide range offers flexibility in adapting to different process requirements.
Functions and Features in Detail
The device features a contact configuration with one delayed normally open contact, one immediate normally open contact, one delayed normally closed contact, and one immediate normally closed contact, equivalent to a changeover contact. The delayed contacts switch only after the set delay time has elapsed, while the immediate contacts switch instantly upon voltage application. A time progress indicator with a red pointer on the device scale visually displays the progress of the delay time. Additionally, a switching position indicator is integrated, visible when the normally closed contacts are closed (not available on the EH 7616 variant). The operating voltage is supplied via terminals A1-A2, with frequency switching between 50 Hz and 60 Hz performed at the rear of the device using a screwdriver.
Technology Explained Simply
The time control is based on a purely mechanical principle, where a synchronous motor realizes the time delay via a mechanical coupling and a time regulator. Repeatability is ensured by the mechanical construction and the stepless adjustment of the delay time. The IP 65 protection class protects the front against splashing water and dust, making the device suitable for environments with higher ambient requirements. The width is 72 mm, and the front face measures 72 x 72 mm, enabling standard mounting in enclosures.
Compatibility and Accessories
The time relay is part of the MINITIMER series and can be combined with other devices from this series, such as models AA 7616, EC 7616, and EH 7616. The different models vary in width, front face size, and additional functions, with the EF 7ли6 offering the largest front face and IP 65 protection. The devices are certified to EN 61812-1, guaranteeing compliance with safety and functional requirements for time relays. A voltage-loss-safe version is optionally available, retaining the elapsed time during power failure.
Mounting and Installation
Mounting is done via front panel installation in enclosures or control systems. The terminals are clearly labeled: A1-A2 for operating voltage, B1-B2 for control voltage (on versions with B1-B2), and contact terminals 15-16 (delayed normally open), 27-28 (delayed normally closed), 31-32 (immediate normally open), and 43-44 (immediate normally closed). The delay time is adjusted using the rotary switches on the front, with time ranges switchable. Frequency switching is performed at the rear of the device.
Operational Advantages
The stepless adjustment of the delay time over a wide range from 0.2 seconds to 60 hours offers high flexibility. The mechanical time control ensures high repeatability and reliability. The IP 65 protection class enables use in humid or dusty environments. The clear display of the time progress and switching position indicators facilitates monitoring of the operating status. Standard mounting in enclosures is simple and quick thanks to the 72 mm width and 72 x 72 mm front face.