Dold 0024300, EAN: 4030641243005

Dold 0024300 time relay delayed response 0,15S-30H

Industrial Material > Industrial relays and contactors > Industrial Timers

Dold 0024300 time relay delayed response 0,15S-30H

Lieske Part No. 534388
Mfg Part No 0024300
EAN-Code 4030641243005
Manufacturer Dold
Here only 314,41 EUR
374,15 EUR incl. VAT

Further information for Dold 0024300 time relay delayed response 0,15S-30H

Technical data
Enclosure designFront panel mounting
Output contacts1 C/O contact
Time function(s)On-delay
Width72 mm
TypeEF 7616
Variant
Contact equipping1 NC contact delayed, 1 NC contact undelayed, 1 NO contact delayed, 1 NO contact undelayed
Nominal voltageAC 230 V
Time range0,15 s - 30 h
The Dold time relay EF7616.24AC50/60HZ230V0,15S-30H is a delayed-action industrial time relay of the MINITIMER series, designed for use in control and switching systems where precise time-controlled activation of components is required. The device is used, for example, to account for the starting behavior of motors or for sequential activation of system components. It features a purely mechanical time delay, which can be adjusted via continuous rotary switches on the front, allowing flexible adaptation to different applications. The width is 72 mm, making it suitable for front panel mounting in standard control panels.

Applications
This time relay is designed for industrial applications requiring a time-delayed switching function. Typical applications include controlling pumps, fans, lighting systems, or other electrical loads where immediate switching is not desired. The delayed activation allows switching operations to be staggered in time, avoiding load peaks or extending the service life of drives. The IP65 protection rating of the front makes the device suitable for use in environments with splashing water, such as production halls or outdoor areas.

Functions and Equipment in Detail
The device provides contact configuration with one delayed normally open contact, one immediate normally open contact, one delayed normally closed contact, and one immediate normally closed contact, equivalent to a changeover contact. The delayed contacts switch only after the set delay time has elapsed, while the immediate contacts switch instantly upon voltage application. The time ranges are adjustable in six switchable steps, with the overall range extending from 0.15 seconds to 30 hours. The repeatability is ≤ ± 0.5 %, with a permissible deviation of ≤ ± 1 % in the 3 and 6-second ranges. A time delay indicator with a red pointer on the scale enables visual monitoring of the time progression. A switching position indicator is also integrated, except in the EH 7616 variant.

Technology Explained Simply
The time delay is based on a purely mechanical principle, where a synchronous motor implements the time delay via a gear train and coupling. Adjustment is performed via a continuous rotary switch on the front, selecting the desired delay time. The rated voltage is AC 230 V, and frequency switching between 50 Hz and 60 Hz is done on the rear of the device by moving a latch with a screwdriver. The time function is delayed-action, meaning the contacts switch only after the set time has elapsed. If the control voltage is interrupted at terminals B1-B2, the time delay is reset; if interrupted at A1-A2, the delay time is extended by the duration of the interruption.

Compatibility and Accessories
The device is designed for front panel mounting and fits standard control panels with a width of 72 mm. It is part of the MINITIMER series and can be combined with other models in the series, such as AA 7616, EC 7616, or EH 7616, depending on requirements for width and function. Contact designations are standardized: A1-A2 for control voltage, B1-B2 for control voltage in the voltage-proof version, 15-16 for delayed normally open, 27-28 for delayed normally closed, 31-32 for immediate normally open, and 43-44 for immediate normally closed. The voltage-proof version is optionally available, retaining the elapsed time during a power failure.

Mounting and Installation
Mounting is done by front panel installation into a suitable control panel. The terminals are clearly labeled, and the delay time is adjusted via the rotary switch on the front. The 50/60 Hz frequency switching is performed on the rear of the device. The connection terminals are designed for wiring, and the device indicator allows visual verification of the operating status. The IP65 protection rating of the front ensures protection against splashing water, enabling use in damp environments.

Advantages in Operation
The time relay offers a wide adjustment range from 0.15 seconds to 30 hours, providing high flexibility for adapting to various applications. The simple adjustment via the continuous rotary switch and the clear time delay indicator facilitate commissioning and maintenance. The purely mechanical technology ensures high reliability and repeatability. The IP65 protection rating of the front expands the application range to damp or splashing water environments. The voltage-proof version (optional) allows retention of the elapsed time during power failure, which is advantageous in critical applications. The contact configuration with delayed and immediate contacts enables flexible control of multiple loads within a system.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/534388
qrcode für Dold 0024300 time relay delayed response 0,15S-30H