| Technical data |
| Enclosure design | Switch cabinet |
| Output contacts max. | 4 NC contacts, 4 NO contacts |
| Thermal current Ith max. | 8 A |
| Width | 45 mm |
| Type | AD 8851 |
| Variant |
| Contact equipping | 4 NO contacts, 4 NC contacts |
| Nominal voltage | DC 220 V |
The Dold toggle relay AD8851.19 DC220V is a bistable relay for use in enclosures, employed in industrial control systems due to its robust construction and clear contact position indication. The device features a contact configuration with
4 closers and
4 openers, making it suitable for complex switching operations involving multiple loads. The nominal voltage is
DC 220 V, and the relay complies with the standard
IEC/EN 61810-1, which defines requirements for electromechanical relays. The width of
45 mm allows for compact mounting in standard enclosures.
Applications
This toggle relay is designed for interlocking control circuits where a secure and permanent contact position is required after pulse or continuous excitation. It is commonly used in process control systems, automation technology, or safety systems, where mechanical stability and clear state indication are important. The bistable function is achieved through two flip-flop magnet systems that lock each other, maintaining the contact state even if the power supply is interrupted.
Functions and Features in Detail
The relay features a solid, torsion-resistant mounting frame that supports both magnet systems and the common contact block. This ensures high mechanical stability and enables use under harsh operating conditions. On the front plate, there is a toggle lever that allows manual actuation of the magnet systems and simultaneously indicates the current magnet or contact position. The contact position remains unchanged after de-energizing the coil, as long as the other coil is not energized.
Technology Explained Simply
The two coils A1-A2 and B1-B2 can each be activated by pulse or continuous excitation. Energizing one coil locks the corresponding magnet system and switches the associated contacts. If both coils are energized simultaneously, the locking is released, and the contact position corresponds to the excitation of coil A1-A2. All contacts are arranged on the same magnet system, preventing undefined states during simultaneous excitation. The response and release time of the contacts is less than 40 ms each, ensuring fast switching response.
Compatibility and Accessories
The relay is designed for operation with direct voltage DC 220 V. The coils are polarity-selectable, enabling flexible integration into existing circuits. The maximum thermal current load is
8 A, with the value varying depending on the number of loaded contacts (8 A for 2 contacts, 5 A for 3 contacts, 4 A for 4 contacts). The switching capacity according to AC 15 is 3 A at AC 230 V for closer contacts and 1 A at AC 230 V for opener contacts. The electrical life is 100,000 switching operations at 1 A and 230 V, with a switching frequency of up to 3000 operations per hour.
Mounting and Installation
The relay is mounted in enclosures and designed for continuous operation. The operating temperature range is from -20 °C to +45 °C, and storage is within the same temperature range. The maximum permissible altitude is 2000 m above sea level. The connection terminals are designed for wiring, and the maximum permissible fuse rating is 10 A gG/gL. Compliance with the standard IEC/EN 61810-1 ensures the reliability and safety of the device.
Advantages in Operation
The toggle relay offers high mechanical stability, clear state indication via the toggle lever, and long service life. The bistable function enables a permanent contact position without continuous power supply, promoting energy savings and reliability. The robust construction makes it suitable for demanding industrial environments where mechanical stress and high switching frequencies occur. Compliance with the standard IEC/EN 61810-1 ensures compatibility with other components in control technology.