Dold 0023698, EAN: 4030641236984

Dold 0023698 coupling relay IK8802.12/005 AC/DC24V

Industrial Material > Industrial relays and contactors > Electronic modules

Dold 0023698 coupling relay IK8802.12/005 AC/DC24V

Lieske Part No. 828141
Mfg Part No 0023698
EAN-Code 4030641236984
Manufacturer Dold
Here only 94,43 EUR
112,37 EUR incl. VAT

Further information for Dold 0023698 coupling relay IK8802.12/005 AC/DC24V

Technical data
Enclosure designDistribution board
Output contacts max.2 C/O contacts
Thermal current Ith max.10 A
Width17,5 mm
TypeIK 8802
Variant
Contact equipping2 changeover contacts
Nominal voltageAC/DC 24 V
VariantFor switching low loads
The Dold coupling relay IK8802.12/005 AC/DC24V is an electronic switch for connecting control and power circuits in industrial systems. It serves as an interface for potential isolation and enables the safe switching of small loads. The device is designed for use in installation distributors and is mounted on a DIN rail. The width is 17.5 mm, making it suitable for use in standard enclosures. The rated voltage is AC/DC 24 V, with operation possible within a voltage range of 0.8 to 1.1 times the rated voltage. The maximum thermal current rating (Ith) is 10 A, with the contact configuration consisting of two changeover contacts. The contact arrangement allows control of two independent loads, with each changeover contact providing one normally open (NO) and one normally closed (NC) contact. The pickup and drop-out time is under 10 ms, ensuring a rapid response to control signals.

Applications
This relay is intended for use in control and regulation technology, particularly in systems requiring galvanic isolation between control and load circuits. It is suitable for applications in automation technology, such as machine control, drive technology, or building automation. The /005 variant is specifically designed for switching small loads, covering voltage ranges from 0.1 to 60 V and currents from 1 mA to 300 mA. The switching capacity according to AC 15 is 3 A at AC 230 V for NO contacts and 1 A for NC contacts, while the DC switching capacity is 1 A at DC 24 V. The electrical life at 3 A and AC 230 V is 2.5 x 10⁵ operations for one changeover contact and 0.5 x 10⁵ operations for two changeover contacts. The mechanical life exceeds 50 x 10⁶ operations.

Functions and Features in Detail
The device includes an LED indicator that lights up when the relay is energized, visually signaling its operating status. This indicator is available only at the rated voltage of AC/DC 24 V. The contact configuration consists of two changeover contacts, each comprising one NO contact (13/14) and one NC contact (11/12). The terminal clamps are flat clamps with self-lifting connection washers, enabling secure and easy connection of conductors. The permissible conductor cross-section is 2 x 2.5 mm² for solid conductors or 2 x 1.5 mm² for stranded conductors with ferrules according to DIN 46228. The tightening torque for the terminals is 0.8 Nm.

Technology Explained Simply
The coupling relay operates on the principle of electromagnetic switching. When control voltage is applied to terminals A1 (+) and A2, a magnetic field is generated that moves the contacts, thereby closing or opening the load circuit. Galvanic isolation between control and load circuits is achieved through the mechanical separation of the contacts. The LED indicator provides visual feedback on whether the relay is activated. The thermal current rating of 10 A refers to the maximum continuous current the relay can carry without thermal overload. The switching capacity according to AC 15 and DC 13 defines the maximum current and voltage values at which the relay can switch safely. Short-circuit resistance is limited by a maximum fuse rating of 6 A gG/gL for the variant with two changeover contacts.

Compatibility and Accessories
The relay is designed for use in standard enclosures with DIN rail (IEC/EN 60715). It is compatible with control voltages of AC/DC 24 V and can be operated in systems with a frequency of 50/60 Hz. The operating temperature range is from -20 °C to +55 °C, and the storage temperature range is from -40 °C to +80 °C. The operating altitude is limited to a maximum of 2000 m above sea level. The enclosure protection rating is IP 40, and the terminal protection rating is IP 20. EMC requirements comply with standards IEC/EN 61000-4-2 to -4-6, including immunity to electrostatic discharge, high-frequency radiation, and fast transients. Radio frequency interference suppression meets Class B limits according to EN 55011.

Mounting and Installation
Mounting is done on a DIN rail (DIN 35 mm) inside the enclosure. The terminal clamps are designed for connection with solid conductors (2 x 2.5 mm²) or stranded conductors with ferrules (2 x 1.5 mm²). The clamps are equipped with self-lifting connection washers to ensure a secure connection. The tightening torque is 0.8 Nm. Electrical connections are made via terminals A1 (+) and A2 (neutral) for control and contacts 11/12/14 and 21/22/24 for the load circuit. The polarity of the control voltage is not critical, as the relay is designed for AC/DC 24 V.

Operational Advantages
The relay offers a high thermal current rating of 10 A and a long mechanical life of over 50 million switching operations. The LED indicator allows for quick visual inspection of the operating status. Galvanic isolation between control and load circuits increases safety and prevents interference. The compact design with a width of 17.5 mm enables dense mounting in enclosures. Compliance with standards IEC/EN 61810-1 and IEC/EN 60947-5-1 ensures reliability and safety in industrial applications. The switching capacity according to AC 15 and DC 13 is sufficient for typical applications in automation technology. The permissible switching frequency is 3000 operations per hour, suitable for dynamic applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/828141
qrcode für Dold 0023698 coupling relay IK8802.12/005 AC/DC24V