| Technical data |
| Classification | Thermistor-Motorschutz |
| Enclosure design | Switch cabinet |
| Measuring range max. | > 3 kΩ |
| Output contacts | 2 C/O contacts |
| Width | 22,5 mm |
| Type | MK 9052 |
| Variant |
| Auxiliary voltage | AC 230 V |
| Contact equipping | 2 changeover contacts |
The Dold motor protection relay MK9052.12AC50/60HZ230V is a
thermistor motor protection device for use in industrial plants, particularly to prevent thermal motor overload. It monitors motor temperature via special thermistors (PTC resistors) and switches off the motor when a critical resistance value is reached. The device is designed for installation in
enclosures and is mounted on a
DIN rail. The auxiliary voltage is
AC 230 V, and the width of
22.5 mm allows for compact integration into existing control systems.
Applications
The motor protection relay MK9052 is used to protect motors from damage caused by high switching frequency, heavy start-up, single-phasing, impaired cooling, or high ambient temperature. It is particularly suitable for applications requiring precise temperature monitoring to prevent thermal overload. The use of up to
6 thermistors in series allows flexible adaptation to different motor sizes and configurations.
Functions and features in detail
The device operates on the
standby current principle, where the output relay is not activated in the event of a fault. This means the output contact is closed during normal operation and opens when the trigger value (≥ 3 kΩ) is reached. The reset delay is < 15 ms, enabling a rapid response to temperature changes. An integrated
wire break detection in the sensor circuit ensures that a defective or broken temperature sensor is detected, preventing false alarms. An
LED indicates the relay's switching state, facilitating visual monitoring during operation.
Technology explained simply
The relay input is designed for connection to
thermistors or
bimetal contacts. The measurement voltage is approximately 1.2 V at a resistance of 1.5 kΩ, and the measurement circuit load is around 1 mW. The output contacts consist of
2 changeover contacts, rated for switching operations with a nominal voltage of AC 230 V. The switching capacity is 3 A as a make contact and 1 A as a break contact according to AC 15. The electrical life is 8 x 10⁵ switching cycles at 3 A and AC 230 V. The mechanical life exceeds 20 x 10⁶ switching cycles. The device is designed for
continuous operation and can be used at an operating temperature of -20 °C to +60 °C.
Compatibility and accessories
The relay is compliant with
IEC/EN 60947-8 and meets the requirements for motor protection devices. It is available with a
zero-voltage protection according to VDE 0113, § 5.4.2, ensuring safe re-energization after a power failure. The terminal connections are designed for
2 x 2.5 mm² solid or
2 x 1.5 mm² stranded wire with ferrule according to DIN 46228. The terminals are secured using flat terminals with self-lifting connection washers, with a tightening torque of 0.4 Nm.
Mounting and installation
Mounting is done via a
DIN rail in accordance with IEC/EN 60715. The device dimensions are 22.5 mm (width) x 82 mm (height) x 99 mm (depth). The enclosure protection rating is
IP 40, and the terminals are rated
IP 20. The device is suitable for operation at altitudes below 2000 m and meets requirements for vibration resistance (amplitude 0.35 mm, frequency 10–55 Hz) and climatic resistance (20 / 060 / 04). The enclosure materials consist of thermoplastic with V0 behavior according to UL Subject 94.
Advantages in operation
The MK9052.12 offers reliable and precise temperature monitoring with minimal load on the measurement circuit. The integrated wire break detection and visual indication via the LED enhance operational safety. The high mechanical and electrical life, along with compatibility with various thermistors, make it a robust and flexible protection device for industrial applications. Compliance with the IEC/EN 60947-8 standard ensures standardized and safe integration into existing control systems.