Dold 0023171, EAN: 4030641231712

Dold 0023171 MK9052.11 AC50/60Hz 230V thermistor motor protection relay

Dold 0023171 MK9052.11 AC50/60Hz 230V thermistor motor protection relay

Lieske Part No. 1153681
Mfg Part No 0023171
EAN-Code 4030641231712
Manufacturer Dold
Here only 131,37 EUR
156,33 EUR incl. VAT

Further information for Dold 0023171 MK9052.11 AC50/60Hz 230V thermistor motor protection relay

Technical data
ClassificationThermistor-Motorschutz
Enclosure designSwitch cabinet
Measuring range max.> 3 kΩ
Output contacts2 C/O contacts
Width22,5 mm
TypeMK 9052
Variant
Auxiliary voltageAC 230 V
Contact equipping1 changeover contact
The Dold MK9052.11 AC50/60HZ 230V is a thermistor motor protection relay used to prevent thermal motor overload in industrial applications. It monitors the temperature of electric motors via special thermistors (PTC resistors) and shuts off the motor when a critical resistance value is reached. The device operates on the rest current principle, in which the output relay is not activated in the event of a fault, ensuring a safe disconnection. The auxiliary voltage is AC 230 V, and the contact configuration includes one changeover contact. The width of 22.5 mm allows for compact mounting in enclosures on a DIN rail.

Applications
This motor protection relay is designed for use in systems where motors may be thermally overloaded due to high switching frequency, heavy starting, single-phase operation, impaired cooling, or high ambient temperature. It protects motors from damage caused by overheating by deactivating the output relay when a predefined resistance value is reached in the sensor circuit. Applications include industrial controls, pumps, fans, and other drive systems requiring reliable temperature monitoring.

Functions and Features in Detail
The device features an input for thermistors or bimetal contacts and detects wire breaks in the sensor circuit to avoid false alarms. The pickup value is at least 3 kΩ, and the reset value is at most 1.8 kΩ. Up to six temperature sensors can be connected in series, enabling flexible adaptation to different motor sizes and requirements. An LED indicates the relay’s switching state, facilitating diagnostics during operation. The measurement circuit load is approximately 1 mW at a resistance of 1.5 kΩ, and the measurement voltage is approximately 1.2 V.

Technology Explained Simply
The relay operates on the rest current principle, meaning the output relay is activated during normal operation and drops out in the event of a fault (e.g., reaching the pickup value). The self-monitoring of the sensor circuit ensures that a broken or defective sensor is detected, preventing false shutdowns. The auxiliary voltage of AC 230 V is supplied via terminals A1/A2, while the temperature sensors are connected to P1/P2. The output contacts (11, 12, 14; 21, 22, 24) enable control of auxiliary circuits, e.g., for warning lights or shutdowns.

Compatibility and Accessories
The device complies with IEC/EN 60947-8 and can be combined with various thermistors specifically developed for motor protection. The terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with sleeve DIN 46228-1/-2/-3/-4). Mounting is on a DIN rail according to IEC/EN 60715. The switching capacity is 3 A / AC 230 V for closing contacts and 1 A / AC 230 V for opening contacts, according to AC 15. The electrical life is 8 x 10⁵ switching operations at 3 A / AC 230 V.

Mounting and Installation
Mounting is on a DIN rail inside an enclosure. The terminals are equipped with self-lifting connection washers, enabling secure and easy connection of wires. The tightening torque is 0.4 Nm. The operating temperature range is -20 °C to +60 °C, and the storage temperature range is also -20 °C to +60 °C. The operating altitude is limited to below 2000 m. The enclosure protection rating is IP 40, and the terminal protection rating is IP 20.

Operational Advantages
The relay provides reliable and low-maintenance temperature monitoring for electric motors. Wire break detection prevents false alarms, and the LED allows for quick status checks. The compact design with a width of 22.5 mm and DIN rail mounting facilitate integration into existing enclosures. The high mechanical life of over 20 x 10⁶ switching operations and the electrical life of 8 x 10⁵ switching operations at 3 A / AC 230 V ensure long-term operation. EMC tests according to IEC/EN 61000-4-2 to -4-5 and radio frequency interference suppression according to Class B limit (EN 55011) ensure stable performance in electromagnetically noisy environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1153681
qrcode für Dold 0023171 MK9052.11 AC50/60Hz 230V thermistor motor protection relay