Dold 0020009, EAN: 4030641200091

Dold 0020009 IK8800.12 AC50HZ 48V remote switch

Dold 0020009 IK8800.12 AC50HZ 48V remote switch

Lieske Part No. 100131
Mfg Part No 0020009
EAN-Code 4030641200091
Manufacturer Dold
Here only 89,42 EUR
106,41 EUR incl. VAT

Further information for Dold 0020009 IK8800.12 AC50HZ 48V remote switch

Technical data
Output contacts max.4 C/O contacts
Thermal current Ith16 A
Width17,5 mm
TypeIK 8800
For top hat rail mountingYes
Variant
Contact equipping2 changeover contacts
Nominal voltageAC 48 V 50 Hz
The Dold IK8800.12 AC50HZ 48V is a remote switch (also known as a current pulse switch) from the IK 8800 product series, specifically designed for use in industrial and commercial electrical installations. The device serves for remotely controlled switching of loads, for example in lighting systems, heating systems, or other electrical consumers, which are integrated via DIN rail mounting in enclosures or distribution units. Operation is performed via short current pulses, significantly reducing energy consumption compared to conventional relays.

Applications
The remote switch is suitable for applications requiring pulse control, for example in building technology, room switches, or systems with multiple decentralized switching points. The ability to operate the contacts manually via an integrated button enables easy commissioning, maintenance, or testing. The switching position indication via a red viewing window signals the active state of the output contacts, facilitating status monitoring during operation.

Functions and Equipment in Detail
The device features a contact configuration with 2 changeover contacts (C/O contacts), enabling loads to be switched and disconnected. The contacts are actuated with each current pulse and remain in the respective switching position until the next pulse. Operation is performed via a control signal at the terminal connections A1 (L/DC+) and A2 (N/DC-). The maximum number of contacts per device is 4 changeover contacts, with the variant described here having 2 changeover contacts. The rated voltage is AC 48 V at a frequency of 50 Hz, with the voltage range lying between 0.9 and 1.1 times the rated voltage. The response time is under 30 ms, ensuring a rapid reaction to control signals.

Technology Explained Simply
The remote switch operates in pulse mode, where contacts are activated only briefly by a current pulse. This results in low energy consumption, as the device consumes no power in standby mode. The thermal current rating (Ith) is 16 A, indicating the maximum continuous load capacity of the contacts. The electrical life at resistive load and 500 switching operations per hour is 10 x 10⁴ switching operations at 16 A. The mechanical life is 3 x 10⁶ switching operations, ensuring high operational reliability over a long period. The operating temperature ranges from -20 °C to +45 °C, and the storage temperature ranges from -25 °C to +55 °C.

Compatibility and Accessories
The device is compliant with IEC/EN 60669 standards and designed for mounting on a DIN rail. The width is 17.5 mm, enabling compact placement in enclosures. In pulse mode, devices can be mounted closely together; for continuous operation, a mounting clearance of 7 mm is required. The terminal connections are intended for control signals (A1, A2) and loads (13/14, 23/24). The switching capacity is specified for incandescent lamp loads (up to 2000 W per contact) and fluorescent lamp loads (up to 20 lamps at 58 W per contact). With lamp loads using electronic ballasts (EVG), a higher number of lamps per contact is possible.

Mounting and Installation
Mounting is performed on a DIN rail, with the width of 17.5 mm enabling efficient space utilization. Installation requires no additional tools, as fixation is achieved via the DIN rail. The terminal connections are clearly labeled (A1, A2, 13/14, 23/24), supporting error-free wiring. The switching position indication facilitates visual verification of the operating state.

Advantages in Operation
The pulse mode results in low energy consumption and reduces heat generation in the device. The integrated manual operation button enables manual control, which is useful for maintenance or testing. The switching position indication enables quick status checks. The compact design and DIN rail mounting simplify integration into existing enclosures. The high mechanical life and compliance with IEC/EN 60669 standards ensure reliable and safe operation in industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/100131
qrcode für Dold 0020009 IK8800.12 AC50HZ 48V remote switch