Further information for Dold 0019773 IK8800.12AC50HZ12V remote switch 12 V
Technical data
Output contacts max.
4 C/O contacts
Thermal current Ith
16 A
Width
17,5 mm
Type
IK 8800
For top hat rail mounting
Variant
Contact equipping
2 changeover contacts
Nominal voltage
AC 12 V 50 Hz
The Dold IK8800.12AC50HZ12V is an industrial remote switch from the IK 8800 series, designed for use in systems with impulse operation. The device features a contact configuration with 2 changeover contacts and is designed for a rated voltage of AC 12 V 50 Hz. It is used for remotely controlled switching operations, where the contacts are actuated with each current impulse and remain in the respective position until the next impulse. The switching position is indicated by a visual indicator, which makes the contact status visibly recognizable. An integrated button allows for manual actuation of the contacts, which is useful during maintenance or testing.
Applications
This remote switch is suitable for applications in industrial electrical engineering as well as in building technology, particularly in systems with room sensors or decentralized switching operations. Due to its impulse operation, it is especially advantageous for installations with low energy consumption and reduced wiring effort. Mounting is done on a DIN rail, with a width of 17.5 mm enabling compact installation. In impulse operation, devices can be mounted closely together; for continuous operation, a mounting distance of 7 mm between relays is required.
Functions and Equipment in Detail
Actuation is performed via a current impulse, causing the contacts to switch to the new position. The switching position remains until the next impulse, ensuring stable and reliable switching functionality. The integrated button allows manual actuation, independent of the electrical signal. The visual indicator displays the current contact position, enabling visual verification of the operating status. The maximum contact configuration is 4 changeover contacts, with the current variant equipped with 2 changeover contacts.
Technology Explained Simply
The impulse operation reduces energy consumption, as the device only draws current during actuation. The rated voltage of AC 12 V 50 Hz is typical for applications in building and industrial technology. The thermal current Ith is 16 A, indicating the maximum current load capacity of the device. The width of 17.5 mm allows for compact mounting on the DIN rail. The switching function complies with IEC/EN 60669, ensuring reliability and safety in industrial applications.
Compatibility and Accessories
The device is designed for use in systems with room sensors or decentralized switching operations. It can be combined with other devices from the IK 8800 series, with mounting distances varying depending on the operating mode (impulse or continuous operation). The contact configuration is available with up to 4 changeover contacts, with the current variant featuring 2 changeover contacts. The connection terminals are designed for connecting control and load lines.
Mounting and Installation
Mounting is done on a DIN rail, with a width of 17.5 mm enabling compact installation. In impulse operation, devices can be mounted directly adjacent to each other. For continuous operation, a spacing of 7 mm between relays is required to ensure heat dissipation and thermal load management. The connection terminals are designed for connecting control and load lines.
Advantages in Operation
The impulse operation ensures low energy consumption and reduces wiring effort, especially in installations with multiple room sensors. Manual actuation via the integrated button enables flexible use. The visual indication of the switching position simplifies diagnosis and maintenance. Compliance with IEC/EN 60669 ensures safe and reliable performance in industrial applications.