Dold 0013865, EAN: 4030641138653

Dold 0013865 MK9988.51 AC/DC24V wiper relay

Dold 0013865 MK9988.51 AC/DC24V wiper relay

Lieske Part No. 1002398
Mfg Part No 0013865
EAN-Code 4030641138653
Manufacturer Dold
Here only 120,02 EUR
142,82 EUR incl. VAT

Further information for Dold 0013865 MK9988.51 AC/DC24V wiper relay

Technical data
Enclosure designSwitch cabinet
Output contacts2 C/O contacts
Time function(s)Fleeting on break, Fleeting on make, Fleeting on make and brake
Time range0,3 s - 0,6 s
Width22,5 mm
TypeMK 9988
Variant
Contact equipping1 fleeting contact (changeover)
Nominal voltageAC/DC 24 V
VariantProgrammable: fleeting on make, fleeting on break, fleeting on make and brake
The Dold wipe relay MK9988.51 AC/DC24V is a programmable time relay for use in industrial control systems. It is designed for time-delayed switching of loads, for example during start-up or shutdown processes, and enables flexible adaptation of the switching function to the respective application. The device is designed for operating voltages of AC/DC 24 V and has a width of 22.5 mm, making it suitable for installation in standard enclosures. The contact configuration includes one wipe contact (changeover), with the MK9988.51 variant equipped with such a contact.

Applications

The wipe relay is used in industrial automation technology where a time-delayed switching function is required. Typical applications include controlling motors, pumps, heating systems, or lighting systems, where a smooth start-up or controlled shutdown is necessary. Programmability allows adaptation to different process sequences without requiring mechanical adjustments. Control is achieved via two-wire initiators, facilitating integration into existing sensor networks.

Functions and Features in Detail

The relay is programmable and can be configured in three different operating modes: switch-on wipe, switch-off wipe, or both switch-on and switch-off wipe. The wipe time is fixed at 0.3 to 0.6 seconds, with a repeatability of less than ±5 %. This accuracy ensures reliable and reproducible switching performance. An LED indicator signals operational readiness, allowing the device status to be visually checked. Programming is done via programming inputs X1, X2, and X3, where bridging the corresponding terminals selects the desired switching function.

Technology Explained Simply

The function of the wipe relay is based on a time-delayed switching function, where the contact does not switch immediately but after a defined delay. This is achieved through an integrated timing circuit based on electronic control. The wipe time is fixed and cannot be individually adjusted, which increases reliability. The contact materials are made of AgSnO₂, a material suitable for high switching life and low contact resistance. The thermal rating is 5 A, and the device is designed for continuous operation. The electrical life is 500,000 switching cycles at 3 A and AC 230 V, while the mechanical life is 20 million switching cycles.

Compatibility and Accessories

The relay is compatible with two-wire initiators, commonly used in industrial sensor networks. Control is via programming inputs X1, X2, and X3, using short wire bridges for configuration. The terminals are designed for conductor cross-sections of 2 x 1.5 mm², allowing solid or stranded conductors with sleeves according to DIN 46228-1/-2/-3/-4 to be connected. The stripping length for conductors is 8 mm. The operating voltage range is 0.8 to 1.1 times the nominal voltage, providing high tolerance to voltage fluctuations.

Mounting and Installation

The device is designed for installation in enclosures and is connected via the designated terminals. Mounting is done in standard control panels with a width of 22.5 mm. The terminals are flat and feature a self-lifting clamp for secure connection. The operating and storage temperature ranges are -20 °C to +60 °C and -40 °C to +70 °C, respectively. The relative humidity may reach up to 93 % at 40 °C. The operating altitude is limited to below 2000 m.

Operational Advantages

The wipe relay offers high reliability due to the fixed wipe time setting and low repeatability deviation. The LED indicator allows for quick visual monitoring of the operational status. Programmability via bridges on the programming inputs enables flexible adaptation to various application scenarios. The high mechanical and electrical life ensures long service life, and compatibility with two-wire initiators simplifies integration into existing systems. The enclosure has IP 40 protection, and the terminals have IP 20 protection, safeguarding against mechanical impacts and contact, with the device designed for indoor use. EMC tests according to IEC/EN 61000-4-2 to -4-6 and radio interference suppression according to Class B ensure safe and disturbance-free operation in industrial environments.

Protection Rating and Environmental Conditions

The relay enclosure has an IP 40 protection rating, meaning protection against solid objects ≥1 mm and splashing water from any direction. The terminals have an IP 20 rating, providing protection against finger contact and vertically falling water. The device is designed for indoor use and complies with the requirements of standard IEC/EN 61812-1. The operating temperature range is -20 °C to +60 °C, and the storage temperature range is -40 °C to +70 °C. The relative humidity may reach up to 93 % at 40 °C. The operating altitude is limited to below 2000 m.

Permissible Switching Capacity and Safety

The rated operating voltage is AC 250 V. The thermal rating (Ith) is 5 A. The switching capacity according to AC 15 is 3 A for closing contacts and 1 A for opening contacts at AC 230 V. The maximum fuse rating is 6 A gG/gL. The electrical life is 500,000 switching cycles at 3 A and AC 230 V, and the mechanical life is 20 million switching cycles. The permissible switching frequency is 3000 switching cycles per hour. Insulation testing is performed at 2.5 kV for 1 minute. The overvoltage category is III, with a rated impulse voltage of 4 kV at pollution degree 2. The creepage and clearance distances comply with IEC 60664-1 requirements.

EMC and Safety Requirements

The device complies with EMC directive requirements according to IEC/EN 61000-4-2 to -4-6. The electrostatic discharge is 6 kV (contact discharge) and 8 kV (air discharge). The high-frequency radiation is 20 V/m in the range 80 MHz to 1 GHz and 10 V/m in the range 1 GHz to 2.7 GHz. Fast transients are 4 kV, and surge voltage between supply lines is 2 kV and between line and earth is 4 kV. The conducted high-frequency interference is 12 V. Radio interference suppression meets Class B limits according to EN 55011. The vibration resistance is 0.35 mm amplitude at a frequency of 10 to 55 Hz. The climatic resistance corresponds to designation 20/060/04 according to IEC/EN 60068-1.

Materials and Construction

The enclosure is made of thermoplastic with V0 flammability rating according to UL Subj. 94, indicating a high fire protection class. The construction is designed for installation in enclosures. The terminals are flat and feature a self-lifting clamp. The stripping length for conductors is 8 mm. Terminal marking follows EN 50005. The connection terminals are designed for conductor cross-sections of 2 x 1.5 mm², allowing solid or stranded conductors with sleeves according to DIN 46228-1/-2/-3/-4 to be connected.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002398
qrcode für Dold 0013865 MK9988.51 AC/DC24V wiper relay