Further information for Dold 0012622 IK8800.12AC60HZ220V remote switch
Technical data
Output contacts max.
4 C/O contacts
Thermal current Ith
16 A
Width
17,5 mm
Type
IK 8800
For top hat rail mounting
Variant
Contact equipping
2 changeover contacts
Nominal voltage
AC 220 V 60 Hz
The Dold impulse switch type IK8800.12AC60HZ220V is a modular device for remote control of electrical loads in installations. The device operates in impulse mode, in which the contacts are actuated with each current impulse and remain in the respective switching position until the next impulse. It is designed for mounting on a DIN rail and has a width of 17.5 mm, enabling compact arrangement in enclosures. The rated voltage is AC 220 V at a frequency of 60 Hz, with the voltage range specified in the datasheet limited to 0.9 to 1.1 times the rated voltage. The thermal current Ith is 16 A, indicating the maximum loadable current for continuous operating conditions.
Applications
The impulse switch is designed for use in electrical installations, particularly in systems with multiple room switches, where central control of loads is required. It is suitable for applications where low energy consumption and reduced wiring effort are prioritized. The impulse control enables efficient control of lighting, heating, or other electrical devices, with contacts being actuated only briefly to change the current flow.
Functions and equipment in detail
The device features a contact configuration with 2 changeover contacts, with a maximum contact configuration of up to 4 changeover contacts possible. The switching position is indicated by a visual indicator, which makes the current contact position clearly visible. An integrated button allows manual actuation of the contacts, which is useful for maintenance work or in case of malfunction. Actuation is performed via a current impulse supplied through terminals A1 and A2, where A1 is the control signal terminal (L or DC+) and A2 is the neutral terminal (N or DC−).
Technology explained simply
Impulse operation means the device consumes power only briefly to switch the contacts. The contacts remain in the respective position until a new impulse is received. This results in low energy consumption and reduces heat generation in the device. Actuation is performed via an electrical signal supplied through the input terminals. The output contacts (13/14, 23/24) switch the load, with the load terminals configured as NO contacts (closed when actuated) or as changeover contacts (C/O). The actuation duration must be at least 50 ms to ensure reliable switching function.
Compatibility and accessories
The device is compliant with IEC/EN 60669 standards and can be combined with other devices of type IK 8800 or IL 8800 in systems. Mounting is on a DIN rail, and in impulse operation, devices can be mounted closely together. For continuous switching, a mounting distance of 7 mm between relays is required to ensure sufficient cooling. The electrical life is 10 x 10⁴ switching cycles at a load of 16 A and 500 switching operations per hour. The mechanical life is 3 x 10⁶ switching cycles.
Mounting and installation
Mounting is on a DIN rail (DIN rail) inside the enclosure. The width of 17.5 mm allows dense arrangement of multiple devices. In impulse operation, mounting can be close; for continuous switching, a spacing of 7 mm between relays is required. The terminals are clearly labeled: A1 (control) and A2 (neutral), as well as load terminals 13/14, 23/24 for the changeover contacts. The operating temperature range is from -20 °C to +45 °C, and the storage temperature range is from -25 °C to +55 °C. The maximum operating altitude is 2000 m above sea level.
Advantages in operation
Impulse operation results in low energy consumption and reduces heat generation in the device. The integrated switching position indicator enables quick visual inspection of the contact position. The manual actuation button provides an additional control option. The compact design with 17.5 mm width and DIN rail mounting facilitates installation in existing enclosures. The standard-compliant design according to IEC/EN 60669 ensures safe and reliable operation in electrical installations.