Dold 0012619, EAN: 4030641126193

Dold 0012619 IK8800.12 AC60HZ 24V remote switch

Installation > Modular devices / equipment installation > Impulse switch / relay

Dold 0012619 IK8800.12 AC60HZ 24V remote switch

Lieske Part No. 894204
Mfg Part No 0012619
EAN-Code 4030641126193
Manufacturer Dold
Here only 93,00 EUR
110,67 EUR incl. VAT

Further information for Dold 0012619 IK8800.12 AC60HZ 24V remote switch

Technical data
Output contacts max.4 C/O contacts
Thermal current Ith16 A
Width17,5 mm
TypeIK 8800
For top hat rail mountingYes
Variant
Contact equipping2 changeover contacts
Nominal voltageAC 24 V 60 Hz
The Dold impulse switch IK8800.12 AC60HZ 24V is a plug-in device for use in electrical installations, particularly in systems with room switches or remote switches. The device operates in impulse mode, in which the contacts are actuated with each current impulse and remain in the respective switching position until the next impulse occurs. It is designed for mounting on a DIN rail and offers a width of 17.5 mm, enabling a compact arrangement in enclosures. The contact configuration includes 2 changeover contacts, with a maximum configuration of up to 4 changeover contacts possible, depending on the selected variant. The rated voltage is AC 24 V at a frequency of 60 Hz, and the thermal current Ith is 16 A.

Applications
The impulse switch is suitable for applications in building automation, lighting control, and industrial control systems. It is frequently used in combination with room switches to coordinate switching operations across multiple locations. The impulse control enables efficient energy use, as current flows only during the short actuation impulse. Devices can be mounted closely together in impulse mode, minimizing space requirements in enclosures. For continuous operation, a mounting distance of 7 mm between relays is required to avoid thermal stress.

Functions and Equipment in Detail
The device features a manual actuation button, allowing the contacts to be switched by hand, for example, for troubleshooting or during faults. The current switching position of the contacts is indicated by a visual indicator, making the operating status clearly visible. This facilitates commissioning and maintenance. The contacts are designed for load switching, with an electrical life of 10,000 switching cycles under resistive load conditions (AC 230 V) and 500 switching operations per hour at 16 A. The mechanical life is 3 million switching cycles.

Technology Explained Simply
Impulse operation means the device does not continuously consume power, but only during short actuation phases. This reduces energy consumption and thermal stress. The contacts switch with each impulse and hold the reached position until the next impulse. The switching time is less than 30 ms, enabling a fast response to control signals. The operating voltage range is 0.9 to 1.1 times the rated voltage, ensuring stable function even with voltage fluctuations. The operating temperature ranges from -20 °C to +45 °C, making the device suitable for use in demanding climatic environments.

Compatibility and Accessories
The device is compliant with IEC/EN 60669 and can be combined with other devices from the IK 8800 and IL 8800 series. Contact assignment is via terminals A1 (control signal) and A2 (neutral), with the output contacts configured as changeover (C/O). The devices are suitable for use with incandescent lamps, fluorescent tubes, and other loads, achieving a high service life of up to 2000 W and 50,000 switching cycles for lamp loads. When using electronic ballasts or parallel compensation, the installation of automatic fuses is recommended to handle high inrush currents.

Mounting and Installation
Mounting is performed on a standard DIN rail. The width of 17.5 mm allows for dense arrangement of multiple devices. In impulse mode, devices can be mounted closely together; for continuous operation, a spacing of 7 mm between relays is required to ensure sufficient cooling. The terminals are designed for cable connections, with wiring according to the specific application. The devices are intended for use in enclosed enclosures.

Advantages in Operation
Impulse operation results in low energy consumption and reduces heat generation in the device. The integrated switching position indicator and manual actuation button facilitate diagnosis and maintenance. The compact design and DIN rail mounting enable flexible and space-saving installation. The high mechanical life and compliance with IEC/EN 60669 ensure reliable performance throughout the entire service life. The devices are suitable for use in installations with multiple room switches, reducing wiring effort.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/894204
qrcode für Dold 0012619 IK8800.12 AC60HZ 24V remote switch