Further information for Dold 0012492 IK8800.12 AC50HZ 24V remote switch
Technical data
Output contacts max.
4 C/O contacts
Thermal current Ith
16 A
Width
17,5 mm
Type
IK 8800
For top hat rail mounting
Variant
Contact equipping
2 changeover contacts
Nominal voltage
AC 24 V 50 Hz
The Dold IK8800.12 AC50HZ 24V is an industrial remote switch designed for use in electrical control and switching systems. The device operates in impulse mode, whereby the contacts are actuated with each current impulse and remain in the respective switching position until the next impulse. The contact configuration includes 2 changeover contacts, enabling flexible switching functionality. The rated voltage is AC 24 V 50 Hz, and the device is designed for mounting on a DIN rail structure, with a width of 17.5 mm. The maximum contact configuration for device type IK 8800 is up to 4 changeover contacts, with the current variant featuring 2 changeover contacts. The thermal current Ith is 16 A, defining the maximum load capacity of the device.
Applications
This remote switch is suitable for applications in industrial automation, building automation, and systems with room sensors. Due to impulse operation, energy consumption is minimized, which is particularly beneficial in installations with multiple room sensors, reducing wiring effort. Devices can be mounted closely together in impulse mode, whereas for continuous switching, a mounting distance of 7 mm between relays must be maintained.
Functions and Features in Detail
The device includes a manual actuation button for the contacts, allowing the switching position to be changed independently of the electrical signal. The current contact position is indicated by a visual indicator, making the contact position clearly visible. This facilitates maintenance and diagnostics during operation. The operating mode complies with IEC/EN 60669, ensuring adherence to international standards for control devices and switches.
Technical Explanation
Impulse operation means the device consumes power only briefly to actuate the contacts and then returns to rest position. This reduces energy consumption compared to continuously energized relays. The contacts remain in the last assumed position until a new impulse is received. Actuation is performed via a control signal connected to terminals A1 and A2. The output contacts (13/14, 23/24) are configured as changeover contacts, with the switching position visible via the visual indicator.
Compatibility and Accessories
The device is designed for mounting on a DIN rail structure and can be mounted in series with other devices of type IK 8800. The width of 17.5 mm allows for compact placement in enclosures. Contact configuration is available up to 4 changeover contacts, with the variant described here featuring 2 changeover contacts. The connection terminals are designed for connecting control signals (A1/A2) and loads (13/14, 23/24).
Mounting and Installation
Mounting is performed on a DIN rail structure, allowing dense arrangement in impulse mode. For continuous switching, a spacing of 7 mm between relays is required to ensure heat dissipation and thermal load management. The connection terminals are clearly labeled, with A1 designated for the control signal (L or DC+) and A2 for the neutral conductor (N or DC-). The load terminals (13/14, 23/24) are configured as changeover contacts.
Operational Advantages
Impulse operation results in low energy consumption and reduces thermal stress on the device. The manual actuation button enables flexible commissioning and maintenance. The switching position indicator allows for quick visual verification of contact status. Compliance with the IEC/EN 60669 standard ensures safe and reliable performance in industrial applications. The width of 17.5 mm and DIN rail mounting facilitate integration into existing enclosures and reduce space requirements.