Dold 0010493, EAN: 4030641104931

Dold 0010493 IK8800.02DC24V surge switch

Installation > Modular devices / equipment installation > Impulse switch / relay

Dold 0010493 IK8800.02DC24V surge switch

Lieske Part No. 740067
Mfg Part No 0010493
EAN-Code 4030641104931
Manufacturer Dold
Here only 54,53 EUR
64,89 EUR incl. VAT

Further information for Dold 0010493 IK8800.02DC24V surge switch

Technical data
Output contacts max.4 C/O contacts
Thermal current Ith16 A
Width17,5 mm
TypeIK 8800
For top hat rail mountingYes
Variant
Contact equipping2 NO contacts
Nominal voltageDC 24 V
The Dold impulse relay IK8800.02DC24V is a modular device for remote switching functions in electrical installations. It is a device of type IK 8800 with a rated voltage of DC 24 V and a contact configuration consisting of two normally open contacts. The device is designed for use in installations where switching functions are activated by short impulses, with the contacts remaining in the position they have assumed after each impulse until the next impulse occurs. Operation is performed via a control signal supplied through the connection terminals A1 and A2. The switching position is indicated by a visual indicator, which is visible when the contacts are activated. An integrated button allows for manual operation of the contacts, which is useful for maintenance or testing purposes.

Applications

The impulse relay is intended for use in electrical installations, particularly in systems with room switches or remote switches, where minimal wiring and low energy consumption are required. It is suitable for applications where the switching function is not continuous but is activated only as needed via short impulses. Mounting is done on a DIN rail structure, with a width of 17.5 mm enabling a compact arrangement. When operated in impulse mode, devices can be mounted closely together; for continuous operation, a mounting distance of 7 mm between relays is required.

Functions and Equipment in Detail

The device features a contact configuration with two normally open contacts (NO contacts), suitable for controlling loads such as lamps, motors, or other electrical consumers. The maximum contact configuration is four changeover contacts, with this specific model configured for two normally open contacts. Operation is triggered by an electrical impulse, with the contacts remaining in the position they have assumed after each impulse. The switching position is indicated by a visible visual indicator, which lights up red when the contacts are activated. An integrated button allows for manual operation, which is helpful during maintenance or for checking functionality.

Technology Explained Simply

The impulse relay operates in impulse mode, where contacts are actuated only with each electrical impulse and then remain in the position they have assumed. This reduces energy consumption compared to continuously energized relays. The thermal current rating is 16 A, indicating the maximum current the device can handle continuously. The operating temperature range is from -20 °C to +45 °C, making the device suitable for use in demanding climatic environments. The operating voltage is fixed at DC 24 V, which is common in many industrial and building technical installations. The connection terminals are designed for connecting control signals and loads, with the standard assignment A1 (DC+) and A2 (DC-).

Compatibility and Accessories

The device is compliant with IEC/EN 60669 and designed for mounting on a DIN rail structure. It is compatible with other devices in the IK 8800 series, which are also available in 17.5 mm or 35 mm widths. The contact configuration can include up to four changeover contacts depending on the model, with this variant featuring two normally open contacts. The connection terminals are designed for connecting control signals and loads, with the standard assignment A1 (DC+) and A2 (DC-). Devices can be mounted in rows, with no additional spacing required in impulse mode, but a spacing of 7 mm between relays must be maintained for continuous operation.

Mounting and Installation

Mounting is done on a DIN rail structure, with a width of 17.5 mm enabling a compact arrangement. Devices can be mounted in rows, with no additional spacing required in impulse mode. For continuous operation, a mounting distance of 7 mm between relays is required to ensure sufficient cooling. The connection terminals are designed for connecting control signals and loads, with the standard assignment A1 (DC+) and A2 (DC-). Installation is carried out in electrical installations where remote switching functions are required, particularly in systems with room switches or remote switches.

Advantages in Operation

The impulse relay offers low energy consumption due to impulse operation, reducing operating costs. Wiring requirements are minimal, especially in installations with multiple room switches, as only one control signal is needed. The switching position is indicated by a visual indicator, simplifying function verification. Manual operation via an integrated button enables easy maintenance and diagnostics. The thermal current rating of 16 A and operating temperature range of -20 °C to +45 °C make the device suitable for a wide range of applications. Compliance with IEC/EN 60669 ensures safe and reliable operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/740067
qrcode für Dold 0010493 IK8800.02DC24V surge switch