Further information for Dold 0009283 IK8800.12AC50HZ230V remote switch
Technical data
Output contacts max.
4 C/O contacts
Thermal current Ith
16 A
Width
17,5 mm
Type
IK 8800
For top hat rail mounting
Variant
Contact equipping
2 changeover contacts
Nominal voltage
AC 230 V 50 Hz
The Dold impulse switch IK8800.12AC50HZ230V is a modular device for use in electrical installations, particularly in systems with room switches or remote switches. The device is designed for operation with alternating voltage AC 230 V at a frequency of 50 Hz and features a contact configuration of 2 changeover contacts. It is designed for mounting on a DIN rail and has a width of 17.5 mm, enabling compact arrangement in enclosures. The IK 8800 device family is manufactured in accordance with the IEC/EN 60669 standard, which defines requirements for switches and switching devices for low-voltage installations.
Applications
The impulse switch is used for remotely controlled switching operations in electrical systems. It is commonly used in lighting control systems, heating systems, or other systems where multiple switching points are controlled via a central device. Impulse control enables low energy consumption, as the device only draws power during the switching impulse. This is particularly advantageous in installations with multiple room switches, as it reduces wiring effort.
Functions and Equipment in Detail
With each electrical impulse, the contacts are actuated and remain in the respective switching position until the next impulse. The switching position is indicated by a visual indicator, which makes the contact status clearly visible. An integrated button allows manual actuation of the contacts, which is useful for maintenance or testing purposes. The maximum contact configuration is 4 changeover contacts, with the current model equipped with 2 changeover contacts.
Technology Explained Simply
Operation is in impulse mode, where the device draws power only briefly to switch the contacts. This results in low energy consumption and reduced heat generation. The thermal current Ith is 16 A, indicating the maximum current load for continuous operation. The operating voltage is AC 230 V, and the frequency is 50 Hz. The switching time is less than 30 ms, enabling a rapid response to control signals. The electrical life at a load of 16 A is 10 x 10⁴ switching cycles at a rate of 500 switching operations per hour.
Compatibility and Accessories
The device is designed for mounting on a DIN rail and can be mounted closely together during impulse operation. For continuous switching, a mounting spacing of 7 mm between relays is required. The contact assignment is via terminals A1 (control signal) and A2 (neutral), with the output contacts configured as changeover (C/O). The switching capacity is rated for a load of 2000 W and 5 x 10⁴ switching cycles. The maximum short-circuit withstand capability is 16 A gG/gL in accordance with IEC/EN 60947-5-1.
Mounting and Installation
Mounting is on a DIN rail, with a width of 17.5 mm enabling compact placement. During impulse operation, devices can be mounted directly next to each other. For continuous switching, a spacing of 7 mm between relays is required to ensure sufficient cooling. The operating temperature range is from -20 °C to +45 °C, and the storage temperature range is from -25 °C to +55 °C. The maximum operating altitude is 2000 m above sea level.
Advantages in Operation
The impulse switch offers efficient control with low energy consumption due to impulse operation. The integrated switching position indicator and manual actuation button facilitate maintenance and diagnostics. The compact design and DIN rail mounting enable flexible and space-saving installation. The maximum contact configuration of 4 changeover contacts provides flexibility for adapting to different requirements. Compliance with the IEC/EN 60669 standard ensures safe and reliable operation in electrical installations.