Further information for Dold 0009273 IK8800.01 AC50HZ 230V remote switch
Technical data
Output contacts max.
4 C/O contacts
Thermal current Ith
16 A
Width
17,5 mm
Type
IK 8800
For top hat rail mounting
Variant
Contact equipping
1 NO contact
Nominal voltage
AC 230 V 50 Hz
The Dold IK8800.01 AC50HZ 230V is a remote switch of the IK 8800 series, specifically designed for use in industrial and commercial electrical installations. The device serves as an impulse relay for remotely controlled switching operations, where the contacts are actuated with each current impulse and remain in the respective position until the next impulse. The switching position is indicated by a visual indicator, allowing the operating status to be checked visually. Operation is performed via a network cable with PoE (Power over Ethernet)-like power supply through the network cable, with a rated voltage of AC 230 V at 50 Hz. The contacts are equipped with 1 normally closed contact, while the series also offers variants with up to 4 changeover contacts. The device is designed for mounting on a DIN rail and has a width of 17.5 mm, enabling compact installation in enclosures.
Applications
The IK8800.01 is suitable for applications in the field of industrial control technology and building technology, particularly in systems with multiple room sensors, where central control is achieved via impulses. The low energy consumption due to impulse operation makes the device suitable for installations with high switching frequencies and low energy requirements. The ability to manually operate the contacts via an integrated button allows for manual override of automatic control, which is useful during maintenance or emergencies. Mounting in rows is possible during impulse operation, while for continuous switching, a spacing of 7 mm between relays is recommended.
Functions and Equipment in DetailThe device operates on the principle of impulse operation, where contacts are actuated only with each current impulse and remain in the respective position afterward. This reduces energy consumption and minimizes thermal stress. The switching position indication is provided by a visual indicator showing the contact status. The integrated button enables manual actuation of the contacts, independent of the electrical signal. The contact configuration is fixed at 1 normally closed contact, while the series also offers variants with up to 4 changeover contacts. The maximum number of output contacts is 4 changeover contacts, enabling flexible adaptation to different switching requirements.
Technology Explained SimplyImpulse operation means the device does not continuously consume power, but only during each switching impulse. This reduces energy consumption and heat generation. The thermal rating is specified with a thermal current Ith of 16 A, indicating the maximum current load for continuous operation. The operating voltage is AC 230 V at 50 Hz, and the device can also be operated at 60 Hz. The operating temperature range is between -20 °C and +45 °C, allowing use in indoor environments and under moderate outdoor conditions. The mechanical life is 3 x 10⁶ switching operations, ensuring high reliability for frequent switching. The electrical life under resistive load at AC 230 V and 500 switching operations per hour is 10 x 10⁴ switching operations at 16 A.
Compatibility and AccessoriesThe device is compliant with IEC/EN 60669 standards and can be installed in enclosures with DIN rail mounting. It is compatible with other devices from the IK 8800 and IL 8800 series, with contact configurations varying by model. The width of 17.5 mm allows for compact mounting, while for continuous switching, a spacing of 7 mm between relays is recommended. The connection terminals are designed for connection to control lines, with signals transmitted via terminals A1 (control signal) and A2 (neutral). The output contacts are rated for loads up to 16 A, with switching capacity for lamp loads up to 2000 W.
Mounting and InstallationMounting is done on a DIN rail, with a width of 17.5 mm enabling compact installation. During impulse operation, relays can be mounted closely together, while for continuous switching, a spacing of 7 mm between devices is recommended to ensure sufficient cooling. The connection terminals are designed for connection to control lines, with signals transmitted via terminals A1 and A2. Installation is carried out in enclosures or distribution boxes, with ambient temperature between -20 °C and +45 °C.
Operational AdvantagesImpulse operation ensures low energy consumption, reducing operating costs and extending component lifespan. The switching position indication allows for quick visual inspection of the operating status. The integrated button for manual actuation provides flexibility during maintenance. The compact design with 17.5 mm width and DIN rail mounting simplifies installation in existing enclosures. The high mechanical life of 3 x 10⁶ switching operations and electrical life for loads up to 16 A make the device suitable for demanding applications. Compliance with IEC/EN 60669 ensures reliability and safety in operation.