Further information for Dold 0009179 IL8800.04 AC50HZ 230V remote switch
Technical data
Output contacts max.
4 C/O contacts
Thermal current Ith
16 A
Width
35 mm
Type
IL 8800
For top hat rail mounting
Variant
Contact equipping
4 NO contacts
Nominal voltage
AC 230 V 50 Hz
The Dold IL8800.04 AC50HZ 230V is an industrial remote switch designed for use in electrical control and switching systems. The device operates in impulse mode, in which the contacts are actuated with each current impulse and remain in the respective switching position until the next impulse. It features a contact configuration with 4 closers and is rated for a nominal voltage of AC 230 V 50 Hz. The width is 35 mm, enabling mounting on a DIN rail. The thermal current Ith is 16 A, indicating the maximum current load capacity of the device. The operating mode is standardized according to IEC/EN 60669, confirming compliance with safety and functional requirements for switching devices in electrical installations.
Applications
The remote switch is suitable for applications in building automation, industrial controls, or lighting systems where remote control via pushbuttons or switches is required. It is often used in combination with room switches to coordinate multiple switching operations via a central device. The low energy consumption due to impulse operation reduces power demand compared to continuous operation systems. Mounting on a DIN rail enables flexible integration into existing enclosures.
Functions and Equipment in Detail
The device features a manual actuation button for the contacts, allowing the switching position to be changed manually without requiring an electrical impulse. The current contact position is indicated by a red indicator, visible when the output contacts are activated. This display facilitates visual inspection of the operating status. The contact configuration is fixed at 4 closers, with a maximum contact arrangement of up to 4 changeover contacts possible depending on the variant. The contacts are rated for a nominal voltage of AC 230 V and can switch loads up to 16 A.
Technology Explained Simply
Impulse operation means the relay is only energized for a short time (minimum 50 ms) to actuate the contacts. After that, the contacts remain in the new position until another impulse arrives. This reduces energy consumption and heat generation. The response time is less than 30 ms, ensuring a fast reaction to control signals. The electrical life at resistive load is 10 x 10⁴ switching operations at 16 A and 500 switching operations per hour. The mechanical life is 3 x 10⁶ switching operations, ensuring high operational reliability over a long period. The operating temperature range is between -20 °C and +45 °C, and the storage temperature range is between -25 °C and +55 °C.
Compatibility and Accessories
The device is suitable for use in systems with room switches and other remote switches. It can be combined with other variants of the IL 8800 series, which offer different contact configurations (e.g., 1, 2, 3, or 4 changeover contacts) or other nominal voltages (e.g., AC 8 V, 24 V, 42 V, DC 12 V, 24 V). Mounting is on a DIN rail, and with impulse operation, close spacing is possible. For continuous operation, a mounting distance of 7 mm between relays is required to ensure sufficient cooling.
Mounting and Installation
Mounting is on a standard DIN rail (DIN rail) with a width of 35 mm. The connection terminals are clearly labeled: A1 for the control signal (L or DC+), A2 for the neutral conductor (N or DC-), and contacts 13/14, 23/24, 33/34, 43/44 for the closer contacts. Installation requires no additional tools, as fastening is done via the DIN rail. Wiring is simple, as the contacts are connected directly to the load.
Advantages in Operation
Impulse operation results in low energy consumption and reduces heat generation in the device. The switching position indicator enables quick visual control of the operating status. The manual actuation button provides an additional option for manual control, which is useful during maintenance or in case of malfunction. The high mechanical life and compliance with the IEC/EN 60669 standard ensure reliable and safe operation in industrial and commercial applications. Mounting on a DIN rail enables flexible and quick integration into existing enclosures.