Dold 0006941, EAN: 4030641069414

Dold 0006941 time relay delayed-on 230 V 50/60 Hz

Industrial Material > Industrial relays and contactors > Industrial Timers

Dold 0006941 time relay delayed-on 230 V 50/60 Hz

Lieske Part No. 882031
Mfg Part No 0006941
EAN-Code 4030641069414
Manufacturer Dold
Here only 305,31 EUR
363,32 EUR incl. VAT

Further information for Dold 0006941 time relay delayed-on 230 V 50/60 Hz

Technical data
Enclosure designSwitch cabinet
Output contacts1 C/O contact
Time function(s)On-delay
Width45 mm
TypeAA 7616
Variant
Contact equipping1 changeover contact delayed, 1 changeover undelayed
Nominal voltageAC 230 V
Time range0,15 s - 30 h
VariantNo-voltage safe
The Dold time relay AA7616.32/10050/60HZ230V0,15S-30H is a delayed-activation relay of the MINITIMER series, designed for use in industrial control and switching systems. It is used for time-delayed activation of devices and components, for example during the start-up of electric motors, where controlled, step-by-step power supply is required. The device operates according to standard EN 61812-1 and features a voltage-loss-safe design, which retains the elapsed delay time in case of power failure. The timing function is purely mechanical and based on a synchronous motor, which is supplied with the rated voltage AC 230 V via control terminals A1-A2.

Applications
This time relay is designed for use in enclosures and is suitable for applications requiring precise, pre-defined delay times. Typical applications include controlling pumps, fans, lighting systems, or other electrical loads where immediate switching is not desired or technically inappropriate. The voltage-loss-safe feature ensures that the set delay time is not reset during short-term power failures, but continues from the point of interruption once power is restored.

Functions and Equipment in Detail
The device features contact configuration with one delayed changeover contact and one instantaneous changeover contact. The delayed contacts switch only after the set time has elapsed, while the instantaneous contacts switch immediately upon activation of the control voltage. The delay time can be continuously adjusted within a range of 0.15 seconds to 30 hours. Adjustment is performed via a rotary switch on the front, which allows selection among six switchable time ranges. A time progression indicator with a red pointer on the scale shows the progress of the delay time. A switching position indicator is also present, except for the EH 7616 variant.

Technology Explained Simply
The time control is mechanical and operates via a synchronous motor, which runs continuously as long as the control voltage is applied to terminals A1-A2. The delay time is controlled by a coupling magnet, which locks a brake when energized. In case of power failure, the brake remains locked, preserving the elapsed time. The repeatability accuracy is ≤ ± 0.5 %, with an allowable deviation of ≤ ± 1 % in the 3 and 6-second ranges. Frequency switching between 50 Hz and 60 Hz is performed on the rear of the device by shifting a latch using a screwdriver.

Compatibility and Accessories
The time relay is designed for use in enclosures and has a width of 45 mm. It is part of the MINITIMER series, which also includes models EC 7616, EF 7616, and EH 7616. The EF 7616 variant features a spray-water-protected front (IP 65), suitable for environments with increased humidity or spray water exposure. Combining it with other models in the series allows flexible adaptation to different requirements regarding size and environmental conditions.

Mounting and Installation
Mounting is performed in standard enclosures. The width of 45 mm corresponds to DIN format, enabling easy integration into existing switching systems. The connection terminals are clearly labeled: A1-A2 for control and operating voltage, B1-B2 for control voltage in voltage-loss-safe configuration, and contact terminals 15-16 (delayed normally open), 27-28 (delayed normally closed), 31-32 (instantaneous normally open), and 43-44 (instantaneous normally closed). Delay time adjustment is done via the rotary switch on the front, with time ranges selected by switching.

Operational Advantages
The continuous adjustment of delay time over a wide range from 0.15 seconds to 30 hours offers high flexibility. Voltage-loss safety ensures reliable operation even during short-term power failures. The mechanical timing system is robust and low-maintenance. The clear display of time progression and switching position facilitates monitoring and maintenance. Simple operation via the front-mounted rotary switch reduces installation and maintenance time.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/882031
qrcode für Dold 0006941 time relay delayed-on 230 V 50/60 Hz