Dold 0004689, EAN: 4030641046897

Dold 0004689 time relay EH7616.24 230V delayed-on

Dold 0004689 time relay EH7616.24 230V delayed-on

Lieske Part No. 1153863
Mfg Part No 0004689
EAN-Code 4030641046897
Manufacturer Dold
Here only 320,41 EUR
381,29 EUR incl. VAT

Further information for Dold 0004689 time relay EH7616.24 230V delayed-on

Technical data
Enclosure designFront panel mounting
Output contacts1 C/O contact
Time function(s)On-delay
Width96 mm
TypeEH 7616
Variant
Contact equipping1 NC contact delayed, 1 NC contact undelayed, 1 NO contact delayed, 1 NO contact undelayed
Nominal voltageAC 230 V
Time range0,15 s - 30 h
The Dold time relay EH7616.24 is a delayed-actuation relay of the MINITIMER series, designed for use in industrial control systems and switchgear. It is used for time-delayed activation of loads, for example when starting motors or for coordinating process sequences where a defined delay between signal and response is required. The device operates at a rated voltage of AC 230 V and is designed for frequencies of 50/60 Hz. The time delay can be continuously adjusted within a range of 0.15 seconds to 30 hours, with a repeatability of ≤ ± 0.5 % (≤ ± 1 % in the range of 3 and 6 seconds). The time function is purely mechanical, ensuring high reliability and low dependence on electronic components.

Applications
This time relay is suitable for use in industrial plants, such as machine controls, pump regulation, or lighting systems. It enables individual adjustment of start-up behavior and switching sequences to avoid load peaks or extend the service life of drives. The front panel mounting form with a width of 96 mm makes it compatible with standard switchboards and allows easy integration into existing switchgear.

Functions and Equipment in Detail
The device features contact configuration with one delayed normally open contact, one immediate normally open contact, one delayed normally closed contact, and one immediate normally closed contact. This corresponds to an output contact type of 1 changeover, where the delayed contacts switch only after the set time has elapsed. The immediate contacts respond instantly as soon as the control voltage is applied. The time delay is adjusted via a continuously variable rotary switch on the front, with six switchable time ranges available. A time progress indicator with a red pointer on the scale shows the progress of the delay time.

Technology Explained Simply
The time control is based on a mechanical principle: a synchronous motor, driven by the control voltage at A1-A2, moves a pointer connected via a coupling to a time mechanism. The delay time is determined by the setting of the rotary switch. If the control voltage at A1-A2 is interrupted, the time delay is reset. The frequency switching between 50 Hz and 60 Hz is performed on the rear of the device by moving a latch with a screwdriver. The device complies with standard EN 61812-1 for delayed-actuation time relays.

Compatibility and Accessories
The time relay is designed for front panel mounting and fits into standard switchboards with a width of 96 mm. It is part of the MINITIMER series and can be combined with other models such as AA 7616, EC 7616, or EF 7616, depending on requirements for width and protection rating. The voltage-loss-safe version is optionally available, in which the elapsed time is retained in case of voltage failure. The switching position indicator is not included in this model (EH 7616).

Mounting and Installation
Mounting is done by installing into a front panel with the appropriate cutout. The terminal connections are clearly labeled: A1-A2 for control voltage, B1-B2 for control voltage in voltage-loss-safe version, and contact terminals 15-16 (delayed normally open), 27-28 (delayed normally closed), 31-32 (immediate normally open), and 43-44 (immediate normally closed). The delay time is adjusted via the rotary switch on the front. Frequency switching is performed on the rear.

Advantages in Operation
The continuous adjustment of the delay time over a wide range from 0.15 s to 30 h allows flexible adaptation to different applications. High repeatability ensures consistent switching operations. The mechanical time control is robust and low-maintenance. The time progress indicator facilitates monitoring of the switching process. The device is designed for industrial environments and meets the requirements of standard EN 61812-1.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1153863
qrcode für Dold 0004689 time relay EH7616.24 230V delayed-on