| Technical data |
| Enclosure design | Switch cabinet |
| Output contacts | 1 C/O contact |
| Time function(s) | On-delay |
| Width | 45 mm |
| Type | AA 7616 |
| Variant |
| Contact equipping | 1 NC contact delayed, 1 NC contact undelayed, 1 NO contact delayed, 1 NO contact undelayed |
| Nominal voltage | AC 230 V |
| Time range | 0,15 s - 30 h |
| Variant | No-voltage safe |
The Dold time relay AA7616.24/10050/60HZ230V0,15S-30H is a delayed-activation
time relay from the MINITIMER series, designed for use in industrial control and switching systems. It is used for time-controlled activation of devices and components, for example, for controlled motor start-up or for synchronizing process steps in production plants. The device features a mechanical time control, which can be easily and precisely adjusted via stepless rotary switches on the front panel. The
delayed activation allows switching operations to start after a defined time interval, thereby increasing operational safety and extending the service life of connected components.
Applications
This time relay is designed for use in enclosures and is particularly suitable for industrial automation technology where time-controlled sequences are required. Typical applications include controlling pumps, fans, lighting systems, or synchronizing machine components. The zero-voltage safety feature ensures that the elapsed delay time is retained during brief interruptions in supply voltage, allowing the timing sequence to resume after voltage is restored. This is especially important in systems requiring high operational reliability.
Functions and Features in Detail
The device features contact configuration with one delayed normally open contact, one instantaneous normally open contact, one delayed normally closed contact, and one instantaneous normally closed contact, which together correspond to a
changeover contact. The instantaneous contacts switch immediately upon actuation, while the delayed contacts switch only after the set time has elapsed. The time ranges are available in six switchable steps, with the current type covering a range from 0.15 seconds to 30 hours. The repeatability accuracy is ≤ ± 0.5 %, with a permissible deviation of ≤ ± 1 % in the 3 and 6-second ranges. A time progress indicator with a red pointer on the scale enables visual monitoring of the timing sequence. A switching position indicator is also integrated, although not available on the EH 7616 variant.
Technical Explanation
The time control is based on a purely mechanical principle, where a synchronous motor realizes the time delay via a gear train and coupling. The coupling is locked by a latch when energized, so that the elapsed time is retained in case of power failure. The operating voltage is AC 230 V, and frequency switching between 50 Hz and 60 Hz is performed on the rear of the device by moving a latch with a screwdriver. The width is 45 mm, enabling compact mounting in standard enclosures. The housing design is intended for use in enclosures.
Compatibility and Accessories
The time relay is part of the MINITIMER series and can be combined with other models in the series such as EC 7616, EF 7616, and EH 7616, depending on requirements for front panel design and degree of protection. For example, the EF 7616 variant features a front panel with IP 65 protection, making it suitable for applications with spray water protection. However, the AA 7616 variant is not equipped with IP 65 protection. The devices are certified to EN 61812-1, ensuring compliance with time relay standards.
Mounting and Installation
Mounting is performed in standard enclosures using screw fastening. The terminal connections are clearly labeled: A1-A2 are for control and operating voltage, B1-B2 are for control voltage. Contacts 15-16 (delayed normally open), 27-28 (delayed normally closed), 31-32 (instantaneous normally open), and 43-44 (instantaneous normally closed) allow for flexible wiring. The delay time is adjusted via the rotary switches on the front panel, with time ranges selected by switching.
Operational Advantages
The wide adjustment range from 0.15 seconds to 30 hours offers flexibility for various application scenarios. Simple operation via stepless rotary switches and high repeatability accuracy ensure reliable and reproducible switching operations. Zero-voltage safety increases operational reliability, especially in systems with critical processes. The mechanical design is robust and low-maintenance, enhancing the device’s service life and reliability in industrial applications.