Dold 0000670, EAN: 4030641006709

Dold 0000670 time relay delayed response 110V

Industrial Material > Industrial relays and contactors > Industrial Timers

Dold 0000670 time relay delayed response 110V

Lieske Part No. 850189
Mfg Part No 0000670
EAN-Code 4030641006709
Manufacturer Dold
Here only 263,95 EUR
314,10 EUR incl. VAT

Further information for Dold 0000670 time relay delayed response 110V

Technical data
Enclosure designSwitch cabinet
Output contacts1 C/O contact
Time function(s)On-delay
Width45 mm
TypeAA 7616
Variant
Contact equipping1 NC contact delayed, 1 NC contact undelayed, 1 NO contact delayed, 1 NO contact undelayed
Nominal voltageAC 110 V
Time range0,15 - 1000 s
The Dold time relay AA7616.24 is a delayed-on relay for use in enclosures, designed for a rated voltage of AC 110 V and a frequency of 50/60 Hz. It is used for time-controlled operation of system components, for example, to account for the start-up behaviour of motors or for sequential activation of devices. The delay time can be adjusted continuously in the range of 0.15 to 1000 seconds, with the time function being purely mechanical and thus independent of electronic components. The width is 45 mm, making it suitable for standard enclosure mounting.

Applications
This device is designed for industrial control tasks where a precise, predefined delay is required at switching-on. Typical applications include control of pumps, fans, lighting systems or other electrical loads, where immediate switching-on is not desired or technically not feasible. The delay function enables controlled sequencing of switching operations in complex systems.

Functions and Equipment in Detail
The time relay features contact configuration with one delayed normally open contact, one immediate normally open contact, one delayed normally closed contact, and one immediate normally closed contact, which together correspond to a changeover contact. The delay time is adjusted via a continuous rotary switch on the front, with the time progression indicated by a red pointer on the scale. The repeatability is ≤ ± 0.5 %, with a permissible deviation of ≤ ± 1 % in the range of 3 and 6 seconds. A switching position indicator is present, although not on the EH 7616 variant, which is not relevant for the AA 7616 model.

Technology Explained Simply
The time function is based on a purely mechanical principle, where a synchronous motor implements the time delay via a mechanical coupling and a pointer on the scale. The delay starts as soon as the control voltage is applied to terminals A1-A2. In versions with additional terminals B1-B2, the time delay can be started by separate switching at B1-B2, which is beneficial for higher repeatability at short times. Frequency switching between 50 and 60 Hz is performed at the rear of the device using a latch, which can be moved with a screwdriver.

Compatibility and Accessories
The device is part of the MINITIMER series from Dold and is compatible with other models in the series such as EC 7616, EF 7616 and EH 7616. It is designed for use in enclosures and complies with standard EN 61812-1. The AA 7616.32 version enables a quick start for short delay times, with terminals A1-A2 remaining permanently connected to the rated voltage. A voltage-loss-safe version is optionally available, in which the elapsed time is retained during a power failure.

Mounting and Installation
Mounting is carried out in standard enclosures with a width of 45 mm. The connection terminals are clearly marked: A1-A2 for control and operating voltage, B1-B2 optionally for control voltage, and contacts 15-16 (delayed normally open), 27-28 (delayed normally closed), 31-32 (immediate normally open), and 43-44 (immediate normally closed). The delay time is adjusted via the rotary switch on the front, with the time progression indicator visually showing the progress.

Advantages in Operation
The wide adjustment range of 0.15 to 1000 seconds allows flexible adaptation to different requirements. The simple operation via the continuous rotary switch and the clear display of the time progression position facilitate commissioning and maintenance. The mechanical time function is robust and independent of electronic components, ensuring high reliability in industrial environments. The repeatability of ≤ ± 0.5 % ensures consistent switching operations over multiple operating cycles. The time delay can also be reset during interruption of voltage at B1-B2, allowing for flexible control design.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/850189
qrcode für Dold 0000670 time relay delayed response 110V