DEHN 952341, EAN: 4013364376632

DEHN 952341 surge protection device Type 2 275V ACI

Energy > Surge Protection

DEHN 952341 surge protection device Type 2 275V ACI

Lieske Part No. 1003415
Mfg Part No 952341
EAN-Code 4013364376632
Manufacturer DEHN
Here only 629,85 EUR
749,52 EUR incl. VAT

Further information for DEHN 952341 surge protection device Type 2 275V ACI

General
NormEN 61643-11
Degree of protectionIP 20
Number of poles4 p
Operating voltage275 V
Monitoring technologyThermo-Dynamik-Control
Protection functionACI switch / spark gap combination
Use in lightning protection systeminterfaces 0B - 1 and higher
SPD according to EN 61643-11 / IEC 61643-11type 2 / class II
Energy coordination with terminal equipment (≤ 10 m)type 2 + type 3
Nominal voltage (a.c.) (UN)230 / 400 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [L-N] (UC)275 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [N-PE] (UC)255 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) [L-N] (In)20 kA
Nominal discharge current (8/20 µs) [N-PE] (In)80 kA
Voltage protection level [L-N]/[N-PE] (UP)≤ 1.5 / ≤ 1.5 kV
Voltage protection level [L-N]/[N-PE] at 5 kA (UP)≤ 1,5 / ≤ 1,5 kV
Follow current extinguishing capability [N-PE] (Ifi)100 Aeff
Response time [L-N] (tA)≤ 100 ns
Response time [N-PE] (tA)≤ 100 ns
Additional external fuse necessarynot required
Short-circuit withstand capability (ISCCR)25 kArms
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic440 V / 120 min. – withstand
Temporary overvoltage (TOV) [N-PE] (UT) - Characteristic1200 V / 200 ms – withstand
Leakage currentno leakage current
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid / flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Capacity4 Standard DIN module, DIN 43880
ApprovalsKEMA
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
The DEHNguard M ACI 275 FM is a multipole surge arrester of Type 2 category, designed for the protection of low-voltage consumer installations against transient overvoltages. The manufacturer is DEHN, and the device carries the manufacturer's number 952341. It is specifically designed for use in the lightning protection zone concept, particularly at interfaces 0B to 1 and beyond, where high protection performance for electrical installations is required. The device consists of a base unit and plug-in protection modules, enabling modular and flexible installation.

Applications
This surge arrester is intended for use in electrical installations in the low-voltage range, particularly in buildings with sensitive electrical and electronic equipment. It protects connected consumers against overvoltages caused by direct or indirect lightning strikes, network disturbances, or other electrical interference sources. Typical applications are near the main distribution board or at the input interfaces of the electrical supply, where the risk of overvoltages is highest.

Functions and Features in Detail
The DEHNguard M ACI 275 FM features an integrated ACI switch/spark gap combination, enabling fast and reliable diversion of overvoltages. The protection function is supported by Thermo-Dynamic-Control monitoring, which continuously monitors the status of the arrester. This technology ensures high device safety by triggering a safe disconnection in case of malfunction or overload of the arrester. The integrated monitoring thus prevents a defective arrester from continuing to operate in the network and potentially causing damage.

Technology Explained Simply
The arrester operates on the principle of overvoltage diversion, where overvoltages are diverted through a spark gap or varistor to reduce the voltage to a safe level for connected devices. The ACI technology (Automatic Switch/Spark Gap Combination) enables automatic response to overvoltages, with the switching function disconnecting the arrester from the network in case of overload or defect. The Thermo-Dynamic-Control monitors the thermal and electrical parameters of the arrester to enable early detection of malfunctions. This technology is particularly important in installations where continuous monitoring of the protection function is required.

Compatibility and Accessories
The DEHNguard M ACI 275 FM is designed for use in low-voltage installations and complies with standard EN 61643-11 for Type 2 surge protection devices. It is suitable for use in lightning protection concepts according to the zone model, particularly at transitions between zones 0B and 1. The modular design allows combination with additional protection modules, provided they are recommended by the manufacturer for the same assembly group.

Installation and Mounting
Installation is typically carried out in a distribution box or switchgear environment, with mounting on a suitable switchboard or mounting plate. Mounting must comply with electrical engineering regulations and the requirements of the relevant standards. It is essential to ensure that the arrester is installed at the correct location within the protection concept to guarantee optimal functionality.

Operational Advantages
The DEHNguard M ACI 275 FM offers high reliability through its integrated monitoring function, enabling continuous performance control. The modular design simplifies maintenance and replacement of protection modules without requiring the entire arrester to be replaced. Compliance with standard EN 61643-11 ensures standardized performance and safety. The protection function is suitable for use in industrial and commercial installations where high availability and safety of electrical systems are required. The Thermo-Dynamic-Control technology ensures that the arrester responds safely even under prolonged stress or in case of failure.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1003415
qrcode für DEHN 952341 surge protection device Type 2 275V ACI