DEHN 942440, EAN: 4013364477148

DEHN 942440 surge arrester Type 2

Energy > Surge Protection

DEHN 942440 surge arrester Type 2

Lieske Part No. 2014696
Mfg Part No 942440
EAN-Code 4013364477148
Manufacturer DEHN
Here only 547,67 EUR
651,73 EUR incl. VAT

Further information for DEHN 942440 surge arrester Type 2

General
SPD according to EN 61643-11 / IEC 61643-11type 2 / class II
Energy coordination with terminal equipment (≤ 10 m)type 2 + type 3
Nominal voltage (a.c.) (UN)230 / 400 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [L-PE] (UC)275 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [N-PE] (UC)255 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)20 kA
Nominal load current for “V-connection” (IL)40 A
Voltage protection level [L-PE]/[N-PE] (UP)≤ 1.5 / ≤ 1.5 kV
Voltage protection level [L-PE]/[N-PE] at 5 kA (UP)≤ 1.5 / ≤ 1.5 kV
Response time (tA)≤ 100 ns
Short-circuit withstand capability (ISCCR)25 kArms
Max. mains-side overcurrent protection with “V-connection”40 A gG
Temporary overvoltage (UT) – characteristic335 V / 5 sec. – withstand, 440 V / 120 min. – withstand
Leakage currentno leakage current
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid, 6 mm2 flexible
Cross-sectional area (max.)10 mm2 solid / flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 20
Capacity4 Standard DIN module, DIN 43880
ApprovalsKEMA, VDE
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
Additional external fuse necessaryno
Multipole surge arrester DEHNguard MP ACI, type 2 according to EN 61643-11 with integrated ACI switch/spark gap combination, consisting of a base part with plugged-in protection modules and double push-in connection terminal suitable for branch and through-wiring. High device safety due to arrester monitoring with thermo-dynamic control. For protecting low-voltage consumer systems against surges. For use in the lightning protection zone concept at the interfaces 0B - 1 and higher.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2014696
qrcode für DEHN 942440 surge arrester Type 2