| General |
| SPD class | L |
| Impulse category | D1, C1, C2, C3, B2 |
| Nominal voltage (UN) | 180 V |
| Max. continuous operating voltage DC (UC) | 180 V |
| Max. continuous operating a.c. voltage (UC) | 127 V |
| Nominal current at 40°C (IL) | 1 A |
| D1 Total lightning impulse current (10/350 µs) (Iimp) | 7.5 kA |
| D1 Lightning impulse current (10/350 µs) per line (Iimp) | 2.5 kA |
| C2 Total nominal discharge current (8/20 µs) (In) | 20 kA |
| C2 Nominal discharge current (8/20 µs) per line (In) | 10 kA |
| Voltage protection level line-line for In C2 (Up) | ≤ 900 V |
| Voltage protection level line-PG for In C2 (UP) | ≤ 650 V |
| Voltage protection level line-line at 1 kV/µs C3 (Up) | ≤ 620 V |
| Voltage protection level line-PG at 1 kV/µs C3 (Up) | ≤ 550 V |
| Series resistance per line | 0 Ohm |
| Cut-off frequency line-line (100 ohms) (fG) | 425 MHz |
| Capacitance line-line (C) | ≤ 10 pF |
| Capacitance line-PG (C) | ≤ 20 pF |
| Operating temperature range (TU) | -40 °C ... +80 °C |
| Operating state / fault indication | green / red |
| Degree of protection | IP 20 |
| Cross-sectional area (solid) | 0.2-1.5 mm² |
| Cross-sectional area (fine stranded) | 0.25-1.5 mm² |
| Cross-sectional area of the earth terminal | 0.08-4 mm² |
| Enclosure material | polyamide PA 6.6 |
| Connection (input) | push-in |
| Connection (output) | push-in / RJ45 |
| Colour | yellow |
| Test standards | IEC 61643-21 / EN 61643-21 |
Compact lightning arrester in a plastic surface-mounted housing for protecting information technology interfaces, particularly telecommunications connections up to VVDSL and G.fast (up to 1 GBit/s). Possibility of connecting individual arresters in series. Input-side connection of 1 double wire using tool-free quick connection technology and integrated strain relief for the connection cable. Optional connection of a double wire or a patch cable with RJ45 connector at the output.