| General |
| Cross section | 50 mm² |
| Material | Copper outside, aluminium inside |
| Connection technology | Sliding onto cut wires |
| Application | Connection of copper with aluminium or steel |
| Material outside | Cu |
| Material inside | Al |
| Length | 40 mm |
| Inside diameter Ø | 8.2 mm |
| Diameter Ø outside | 10.0 mm |
| Material thickness | 1.0 mm |
The CUPAH GL Q50 L40 CU AL from DEHN is a specially developed Cupal sleeve for secure and corrosion-resistant connection between copper conductors and aluminium or steel conductors. These connection elements are used in electrical installations where different metals must be connected to extend, join, or connect conductors to devices. The sleeve is designed as a slip-on version, allowing it to be directly slid onto cut conductors without requiring additional tools or special mounting procedures.
Applications
The Cupal sleeve is particularly used in industrial and commercial electrical installations where copper must be connected to aluminium or steel. Typical applications include earthing systems, conductor connections in machine and plant engineering, and in building electrotechnics where different materials are present in the network. The connection is made by sliding the sleeve onto the prepared conductors, creating a mechanically stable and electrically conductive connection.
Functions and Equipment in Detail
The sleeve consists of an outer copper shell and an inner aluminium shell, achieving galvanic separation between the metals. This construction prevents the formation of galvanic corrosion, which can occur when copper and aluminium are in direct contact. The connection is made by sliding the sleeve onto the cut conductors, pressing the metallic surfaces together to form a secure connection. The sleeve is designed for a cross-section of 50 mm², corresponding to a round conductor with a diameter of 8 mm.
Technology Explained Simply
The designation CUPAH GL Q50 L40 CU AL describes the specific version: CUPAH stands for Cupal sleeve, GL for the slip-on version, Q50 for the cross-section of 50 mm², L40 for the length of 40 mm, and CU AL for the material combination of copper (outer) and aluminium (inner). The sleeve is slid onto the cut conductors, pressing the metallic surfaces together. The galvanic separation provided by the double-shell construction prevents electrochemical reactions that could lead to corrosion. The connection is therefore durable and reliable, even under industrial conditions.
Compatibility and Accessories
The Cupal sleeve is designed for connecting copper conductors with aluminium or steel conductors. The sleeve is supplied as a single unit and requires no additional mounting aids.
Mounting and Installation
Installation is done by sliding the sleeve onto the cut conductors. The conductors must be clean and free of oxidation before installation to ensure optimal electrical conductivity. The sleeve is slid onto the conductors, pressing the metallic surfaces together. No additional tools or special mounting procedures are required. The connection is immediately functional after sliding on.
Advantages in Operation
Using the CUPAH GL Q50 L40 CU AL ensures a durable and corrosion-resistant connection between different metals. The galvanic separation prevents electrochemical reactions that could lead to corrosion. The connection is mechanically stable and electrically conductive, increasing the reliability of the electrical system. The simple installation by sliding reduces installation time and requires no special tools.