| General |
| Clamping range for pipe Ø | 21 mm |
| Material | MCI / St/tZn |
| Dimension (l1 x r1) | 80 x 11 mm |
| Standard | EN 62561-1 |
The earth pipe clamp ERS 21 AS4.10 TG STTZN from DEHN is a component for lightning protection and equipotential bonding in electrical installations. It is designed for the secure integration of pipes with an outer diameter of 21 mm (1/5,1 cm ( 2 inch )) into the protective and functional equipotential bonding in accordance with DIN VDE 0100-410/540, as well as into the lightning protection equipotential bonding according to DIN EN 62305-3 (VDE 0185-305-3). The product complies with the standard DIN EN 62561-1, which defines requirements for earthing materials in lightning protection systems.
Applications
The clamp is used in electrical installations to integrate metallic pipe lines, for example water or heating pipes, into the earthing system. This ensures that potential differences between various metallic parts are dissipated in the event of a lightning strike or fault current. This protects people and installations from dangerous touch voltages. The clamp is intended for use in buildings and technical installations where proper earthing is required.
Functions and equipment in detail
The earth pipe clamp features a clamping area for pipes with an outer diameter of 21 mm, in accordance with the standard DIN EN ISO 228-1. The fastening is achieved using screws with dimensions M10 x 30 mm and M8 x 20 mm. The screws and nut are made of steel with zinc coating (St/tZn), providing good corrosion resistance. The clamp itself is made of TG (deep-drawn steel) with zinc coating, enhancing mechanical strength and weather resistance.
Technology explained simply
The clamp enables a secure electrical connection between the pipe to be earthed and the earthing conductor. The connection is made via a round wire (Rd) with a diameter of 4 to 10 mm or via a flat conductor with a maximum cross-section of 70 mm². The dimensions of the clamp are 80 mm in length (l1) and 11 mm in width (r1). The lightning current-carrying capacity is specified according to the standard DIN EN 62561-1, with the exact classification detailed in the test certificate. This means the clamp is suitable for use in lightning protection systems that must withstand high current surges.
Compatibility and accessories
The clamp is designed for pipes with an outer diameter of 21 mm and can be connected to earthing conductors up to 70 mm² cross-section. The connection is made via the integrated M10 and M8 screws. The clamp is part of DEHN’s earth pipe clamp lightning protection product family and can be used in combination with other equipotential bonding components, such as parallel or T-connectors, to build complex earthing systems.
Installation and mounting
Mounting is performed by tightening the M10 and M8 screws, which securely hold the pipe in the clamp. The earthing conductor is connected via the designated connection points (round wire Ø 4–10 mm or max. 70 mm²). The clamp is designed for fixed mounting on metallic pipe lines. Installation requires no additional tools other than a suitable screwdriver or wrench for the M10 and M8 screws.
Advantages in operation
The clamp provides a reliable and durable connection between the pipe line and the earthing conductor. The use of steel with zinc coating ensures high corrosion resistance, extending the component’s service life. Compliance with DIN EN 62561-1 guarantees that the product meets the requirements for lightning protection systems. Clear marking and standardized dimensions facilitate planning and installation in electrical installations.