| General |
| Diameter | 10 mm |
| Mounting | Ambidextrous |
| Function | Interception rod |
| Application range | roof-mounted structures, chimneys, antenna masts |
| Mounting options | concrete base with wedge technology, rod holder, spacing holder |
| Total length (l1) | 1000 mm |
| Material | AlMgSi |
| Diameter Ø | 10 mm |
| Standard | EN 62561-2 |
The DEHN lightning rod type FS 10 1000 AL is a lightning protection component for protective measures on roof structures, chimneys, and similar structures. It serves as a down conductor in the lightning protection system and is manufactured with bevelled ends on both sides to ensure a secure connection to other components of the system. The rod is made of aluminium, with a diameter of 10 mm and a length of 1000 mm. It is designed for outdoor use and can either be anchored in a concrete plinth using wedge technology or secured with rod holders or spacing brackets.
Lightning protection systems are necessary to protect structural elements from direct lightning strikes. The lightning rod functions as a
lightning rod – an element that captures the lightning current and diverts it into the earthing system. The bevelled ends on both sides allow for flexible installation and secure connection to other conductors or brackets. The use of aluminium as the material provides good conductivity and corrosion resistance, which is crucial for outdoor applications.
Applications include particularly roof structures, chimneys, flues, antenna masts, and other elevated structures that pose an increased risk of lightning strikes. The rod is designed for installation in concrete plinths, where a suitable plinth such as type 102075 BES8.5KGKT1016D240SET (concrete plinth C45/55 with wedge D240 mm) can be used. Alternatively, the rod can be secured using special rod holders or spacing brackets, enabling flexible adaptation to different mounting conditions.
Functions and equipment in detail include the bevelled ends on both sides, which ensure a secure mechanical connection to other conductors or brackets. The aluminium construction provides sufficient electrical conductivity and resistance to weather influences. The length of 1000 mm allows sufficient reach for most roof structures. The rod is not intended for use in concrete plinths with different dimensions or techniques, unless the mounting is done via special brackets.
Technology explained simply means that the lightning rod functions as part of a complete lightning protection system. In the event of a lightning strike, the high current is diverted through the lightning rod and conducted into the earth via the earthing system. The bevelled ends ensure that the rod can be securely connected to other conductors without requiring additional connection pieces. The use of aluminium offers a good combination of conductivity and corrosion resistance, which is important for long-term durability in outdoor environments.
Compatibility and accessories include use with concrete plinths such as type 102075 BES8.5KGKT1016D240SET, specifically designed for mounting lightning rods with wedge technology. Alternatively, rod holders or spacing brackets can be used to attach the rod to existing structures.
Installation and mounting is carried out either by installing the rod in a concrete plinth using wedge technology or by securing it with rod holders or spacing brackets. The bevelled ends on both sides facilitate mechanical connection to other components of the lightning protection system. It is important that the installation complies with applicable standards and regulations for lightning protection to ensure safe operation.
Operational advantages include easy installation, high corrosion resistance, and good electrical conductivity of the aluminium. The bevelled ends allow flexible integration into existing lightning protection systems. The rod is suitable for outdoor use and provides reliable protection for elevated structures. The use of concrete plinths or brackets enables adaptable installation at various locations.