CyberPower OL5KERTHD, EAN: 4712856275902

CyberPower OL5KERTHD UPS 5000W Online

UPS > Accessories

CyberPower OL5KERTHD UPS 5000W Online

Lieske Part No. 1266828
Mfg Part No OL5KERTHD
EAN-Code 4712856275902
Manufacturer CyberPower
Here only 2.723,60 EUR
3.241,08 EUR incl. VAT

Further information for CyberPower OL5KERTHD UPS 5000W Online

Battery
Battery technologySealed Lead Acid (VRLA)
Battery capacity6 Ah
Battery voltage12 V
Number of batteries supported1
Typical backup time at full load2.3 min
Typical backup time at half load6.4 min
Battery recharge time4 h
Hot-swap batteryYes
Certificates
Compliance certificatesCE, EAC, RCM, RoHS
Design
Form factorRackmount/Tower
Housing materialMetal
Product colourBlack
Control typeButtons
Display typeLCD
LED indicatorsYes
Features
UPS topologyDouble-conversion (Online)
Output power capacity5 kVA
Output power5000 W
WaveformPure sine
Input operation voltage (min)200 V
Input operation voltage (max)240 V
Input frequency50/60 Hz
Output operation voltage (min)200 V
Output operation voltage (max)240 V
Output frequency50/60 Hz
Maximum current24 A
Surge energy rating2430 J
Response time0 ms
Heat dissipation1186 BTU/h
Efficiency (ECO mode)97%
Input power factor0.99
Output power factor1
Power Factor Correction (PFC) typeActive
Crest factor3:1
Total Harmonic Distortion (THD) (linear load)3%
Total Harmonic Distortion (THD) (non-linear load)5%
Noise level66 dB
Power protection featuresOverload
Audible alarm modesAlarm when on battery, Battery replacement, Fault, Low battery alarm, Overload alarm
ECO modeYes
Emergency Power Off (EPO)Yes
EMI/RFI noise filteringYes
Surge protectionYes
Audible alarm(s)Yes
Logistics data
Harmonized System (HS) code8504408690
Country of originChina
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-5 - 45 °C
Operating relative humidity (H-H)0 - 90%
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 3000 m
Non-operating altitude0 - 4500 m
Other features
Battery typeRBP0144
Packaging content
Cables includedSerial, USB cable
ManualYes
Packaging data
Package width600 mm
Package depth1100 mm
Package height335 mm
Package weight52 kg
Ports & interfaces
AC outlet typesC13 coupler, C19 coupler, Terminal
Power plugTerminal
AC outlets quantity6 AC outlet(s)
USB 2.0 ports quantity1
Serial interface typeRS-232
Serial ports quantity1
RS-232 ports1
USB portYes
Serial interfaceYes
Emergency Power Off (EPO) connectorYes
Sustainability
Sustainability certificatesENERGY STAR
Sustainability complianceYes
Weight & dimensions
Width433 mm
Depth720 mm
Height86.5 mm
Weight42 kg
The CyberPower OL5KERTHD is an online UPS (double-conversion topology) with an output capacity of 5 kVA and an output power of 5000 W, designed for protecting critical IT infrastructure such as servers, workstations, NAS devices, network and telecommunications equipment, as well as security systems. The device provides a pure sine wave output, which is required for sensitive equipment with high power quality requirements. The UPS is designed for use in rack systems (2 HE) as well as in tower format and features a metallic housing in black, ensuring a robust and compact design.

Applications

The OL5KERTHD is suitable for use in server rooms, data centers, office facilities, and other environments where uninterrupted power supply for IT systems and networks is necessary. The devices are generator-compatible, making them suitable for mobile or remote locations where the mains voltage is unstable or unavailable. The integrated battery management technology (BMS) ensures optimal battery lifespan through voltage adjustment and even charging.

Features and Equipment in Detail

The device features six AC outlets, consisting of four IEC C13 and two IEC C19 connectors, as well as one terminal connection, to ensure flexible connectivity for various devices. Power supply is via a network with an input voltage of 200 to 240 V and a frequency of 50/60 Hz. The output voltage is also between 200 and 240 V, with a frequency of 50/60 Hz. The maximum current is 24 A. The UPS offers an ECO mode, which increases efficiency up to 97 % and thus reduces energy consumption. The response time is 0 ms, enabling seamless transition to battery power in case of mains failure.

Technology Explained Simply

The double-conversion topology ensures that the load is continuously supplied via the inverter, regardless of the mains status. This guarantees uninterrupted power supply. The integrated battery management technology (BMS) monitors and regulates the battery charge states to ensure even usage and longer lifespan. The hot-swap function allows battery replacement without interrupting power supply, which is advantageous for critical applications. The typical backup time is 2.3 minutes at full load and 6.4 minutes at half load. The battery is fully recharged in 4 hours.

Compatibility and Accessories

The OL5KERTHD is equipped with an integrated SNMP slot (RMCARD205), enabling remote monitoring over the network. Additionally, a USB port (USB 2.0) and a serial interface (RS-232) are available to enable connection to management software such as PowerPanel. External battery extensions (EBM) can be connected to extend backup time. Compatible accessories include replacement battery pack RBP0144, sensor for environmental data (compatible with RMCARD205/400), as well as various accessory modules such as bypass and IEC socket modules.

Mounting and Installation

The UPS can be mounted in rack (2 HE) or tower format. The delivery includes rackmount rails, rackmount brackets, a terminal cover, a screw set, a USB cable, a serial cable, and the user manual. Installation is to be carried out at a grounded mains connection with a maximum overcurrent protection of 50 A. The ambient temperature should be between 0 °C and 40 °C, and the relative humidity during operation between 0 % and 90 %. The ventilation openings must not be blocked, and the UPS must not be exposed to direct sunlight or strong heat sources.

Operational Advantages

The OL5KERTHD offers high reliability through the double-conversion topology, pure sine wave output, and hot-swap function. The integrated BMS technology extends battery lifespan, while the ECO mode reduces energy costs. Remote monitoring via SNMP and PowerPanel software enables centralized control and monitoring. Acoustic alarms inform about conditions such as battery operation, low battery charge, overload, or faults. The devices are equipped with a tiltable LCD display showing status information such as voltage, frequency, charge status, and error messages.

Certifications and Sustainability

The UPS complies with the conformity certificates CE, EAC, RCM, and RoHS. Additionally, it is awarded the ENERGY STAR certification, confirming energy efficiency. The operating temperature is between 0 °C and 40 °C, and the storage temperature between -5 °C and 45 °C. The maximum operating altitude is 3000 m, and the storage altitude is 4500 m. The relative humidity during operation is 0 to 90 %, and during storage 0 to 95 %.

Connectors and Interfaces

The UPS features one USB port (USB 2.0), one serial interface (RS-232), and an emergency power off (EPO) connector. The AC outlets consist of four C13 and two C19 connectors, as well as one terminal connection. The input and output voltage is between 200 and 240 V, with a frequency of 50/60 Hz. The maximum current is 24 A. The devices are equipped with an EMI/RFI noise filter to minimize interference. The noise level is 66 dB.

Battery and Power Supply

The UPS uses a sealed lead-acid battery (VRLA) with a voltage of 12 V and a capacity of 6 Ah. The battery is hot-swap capable and can be replaced without interrupting power supply. The charging time is 4 hours. The typical backup time is 2.3 minutes at full load and 6.4 minutes at half load. The battery management technology ensures even charging and extends battery lifespan.

Design and Operation

The device has a metallic housing in black with dimensions of 433 mm (width) × 720 mm (depth) × 86.5 mm (height). The weight is 42 kg. Control is via buttons, and the display is a tiltable LCD showing status information. LED indicators signal the operating status. The UPS is intended for indoor use, where the ambient temperature is between 0 °C and 40 °C and the humidity is between 0 % and 90 %.

Safety and Operating Conditions

The UPS is intended for use in temperature- and humidity-controlled indoor environments, free from conductive contaminants. The operating temperature is between 0 °C and 40 °C, and the storage temperature between -5 °C and 45 °C. The relative humidity during operation is 0 to 90 %, and during storage 0 to 95 %. The maximum operating altitude is 3000 m, and the storage altitude is 4500 m. The UPS features overvoltage protection, lightning protection, and overload protection. Acoustic alarms inform about critical conditions such as battery replacement, fault, low battery warning, and overload.

Certifications

  • CE, EAC, RCM, RoHS
  • ENERGY STAR

Delivery Contents

  • OL5KERTHD UPS
  • Rackmount rails
  • Rackmount brackets
  • Terminal cover
  • Screw set
  • USB cable
  • Serial cable
  • User manual

Accessories and Extensions

  • Replacement battery pack RBP0144
  • Sensor for environmental data (compatible with RMCARD205/400)
  • Accessories: Bypass, IEC socket modules, input and output fixed connections, IEC C13 (4) + IEC C19 (2), up to 63 A, 48,3 cm ( 19 inch ) 2HE
  • UPS battery BPE144VL2U01 48,3 cm ( 19 inch ) (freight shipping)
  • Accessories: Bypass, IEC socket, input fixed connection (1), output fixed connection (1), IEC C13 (7) + IEC C19 (1), up to 63 A, 48,3 cm ( 19 inch ) 2HE, MBP63AHVHW82U
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1266828
qrcode für CyberPower OL5KERTHD UPS 5000W Online