Automatic testing and control system in accordance with DIN EN 62034 for up to 800 CGLine+ self-contained luminaires, divisible into 4 strands of 200 luminaires each (or 2 strands of 400 luminaires each). For emergency lighting installations in accordance with DIN EN 50172, DIN V VDE V 0108-100 and DIN VDE 0100-560. An integrated web server enables convenient visualization, control and monitoring of all connected CGLine+ luminaires from any workstation PC in the intranet using a standard web browser without any additional special software. All data and commands are transmitted from the luminaires to the CGLine+ web controller via an unshielded 2-core bus cable (e.g. JY(ST)Y 2 x 2 x 0.8), which can be installed in a free topology, without bus terminating resistors. In the CGLine+ system, the luminaires do not have to be addressed manually. All CGLine+ lights are given a unique address at the factory, a 6-digit ID number in HEX code. This is used to automatically recognize all connected lights on the controller during commissioning. In addition, each individual light can be assigned a numerical short address and an individual name (up to 20 characters) during configuration. This makes it possible to use this identification, for example, as a location designation. The installed CGLine+ lights can be physically divided into 4 strands. In addition, the lights can be freely assigned logically into up to 8 zones per strand. Zones can be areas in which the lights are to be spatially grouped together, e.g. on one floor, in one area or just for one room. If only 2 strands are used, a division into up to 16 zones per strand is possible. Function and operating time tests are started automatically by the CGLine+ web controller. For this purpose, the lights can be divided into up to 8 different test groups, for example so that an operating time test on lights installed next to each other is not started at the same time. The period between the tests can be freely set. It is also possible to start/abort a function or operating time test manually. This applies to all lights, a line, a zone or just a single light. The communication between the controller and each individual light is monitored cyclically. In the event of a bus line interruption, the additional integrated test function in each CGLine+ light ensures that the prescribed tests are carried out automatically and displayed on site on the light. All test results are stored in an electronic test log for at least 4 years. This can be viewed directly via the web browser. To carry out further evaluations of the test log,The test log can be saved directly on the controller on a standard USB stick and conveniently analyzed on a PC using the CGLine+ PC software. The integrated mail client automatically sends an email notification with an acknowledgement function for assignable events to up to 10 email recipients. The 10 email addresses are divided into 2 email recipient groups in order to create an escalation hierarchy. Floor plan programming integrated in the web server allows the lights to be clearly displayed in the web browser on a building floor plan. Up to 30 floor plan images can be loaded per controller. The lights are shown in color with their status in the floor plan. When you touch a light with the mouse pointer, a status window opens with further information about the light. An integrated menu clearly displays all CGLine+ web controllers in the intranet on one page and shows the current status for each zone. The integrated hyperlink function simplifies navigation to the various web servers. The operation of the controller is password protected