Busch Jaeger 2CKA001710A3926, EAN: 4011395131626

Busch Jaeger 2CKA001710A3926 Cover 1766-884 studio white matte

Installation > Switch Material > Switch flush surface

Busch Jaeger 2CKA001710A3926 Cover 1766-884 studio white matte

Lieske Part No. 105711
Mfg Part No 2CKA001710A3926
EAN-Code 4011395131626
Manufacturer Busch Jaeger
Here only 12,34 EUR
14,68 EUR incl. VAT

Further information for Busch Jaeger 2CKA001710A3926 Cover 1766-884 studio white matte

General
Assembly arrangementCentral cover plate
UtilizationD-Sub 15-pole
Outlet directionStraight
Imprintable labelWithout indication field
Mounting methodFlush mounted (plaster)
MaterialPlastic
Material qualityThermoplastic
Surface protectionLacquered
Surface finishingMatt
ColourWhite
RAL-number (akin)9016
Type of fasteningMounting with screw
Suitable for number of connectors1
Suitable for degree of protection (IP)IP20
Width of device63
Height of device63
Depth of device8.4
Impact strengthIK03
Support ringno
With dust coverno
With hinged lidno
With imprintno
Halogen freeyes
Transparentno
With buses/couplingsno
With strain reliefno
Shielded busesno
Shielded housingno
Luster terminalno
Antibacterial treatmentno
With lightingno
The cover 1766-884 from Busch Jaeger is a flush-mounted component for platform 63, specifically designed as a finishing plate for various mounting inserts in electrical and data installations. The product is offered in the design line future® linear in the colour variant studioweiss matt and serves as an optically coordinated cover for TAE, UAE/TAE inserts, USB, VGA, and HDMI socket outlets, as well as speaker socket outlets. It is also suitable for USB power supply inserts, data modules, and modular socket outlets with 90° RJ45 outlets from Telegärtner (series MJ and WE). The cover is part of the product families future® linear, Busch-axcent®, and carat®, with the variant future® linear - matt specified here.

Applications

The cover is used in electrical installations to integrate mounting inserts such as communication adapters, speaker socket outlets, or USB charging units visually. It is particularly suitable for applications where a clean, uniform surface in the building cabling area is required. The cover is intended for indoor use only, as the protection rating IP20 does not provide protection against contact or water ingress. The cover is not intended for outdoor use or damp environments.

Functions and Equipment in Detail

The cover is made of thermoplastic and is manufactured halogen-free, offering better fire behaviour properties compared to halogen-containing plastics. The surface is lacquered and finished in a matt appearance, ensuring a uniform, low-reflection look. The colour corresponds approximately to RAL number 9016. The cover is without a labelling field and without printing, allowing it to blend optically into existing installations without displaying additional markings. Fixing is done via screw, with no strain relief or lampholder clamp integrated. The cover is not shielded, neither the housing nor the sockets, and serves exclusively as a mechanical closure.

Technology Explained Simply

The cover is designed for straight outlet direction, meaning the cable or plug is led vertically out of the wall. Dimensions are 63 mm width, 63 mm height, and 8.4 mm depth, matching the standard size for platform 63. Impact resistance is IK03, providing minimal protection against mechanical impacts such as light touches or small objects. The cover is not intended for use with mounting rings and is without dust protection. It is used exclusively as a central plate for D-Sub 15-pin connectors, and the cover is not equipped with sockets or couplings.

Compatibility and Accessories

The cover is compatible with various mounting inserts, including TAE and UAE/TAE inserts, USB and VGA socket outlets, as well as speaker socket outlets. It fits products such as item number 0248/04-101 (speaker socket outlet) and 0219/13 (data module). For visual coordination, various frames and cover frames are available in the design lines future® linear, Busch-axcent®, and carat®, for example frames 1721-885K (1-way, black matt) or 1722-885K (2-way, black matt). The cover is also suitable for Keystone mounting adapters.

Installation and Mounting

Mounting is carried out in the flush-mounted area, with the cover being fixed to the wall plate using a screw. Installation requires an exact cutout in the plaster, matching the dimensions of 63 mm × 63 mm. Fixing is done without additional tools that are not part of the product.

Advantages in Operation

The cover provides a uniform, clean appearance in the installation, integrating seamlessly into existing wall designs. The use of halogen-free thermoplastic improves fire protection properties. The matt lacquered surface reduces reflections and ensures an even visual appearance. The cover is designed for indoor use and offers a robust, though not particularly impact-resistant, construction suitable for normal handling. Compatibility with various mounting inserts enables flexible use in different installation scenarios.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/105711
qrcode für Busch Jaeger 2CKA001710A3926 Cover 1766-884 studio white matte