Further information for Beha 4560615 AMP-320-EUR TRMS Clamp 600A
General
Current measurement range
0.00 to 600 A
Voltage measurement range
0.00 to 600 V
Pliers opening
35 mm
Temperature measurement
°C or °F
Safety specification
CAT IV 600 V
True RMS measurement
Field rotation test
Motor rotation direction check
Inrush current monitoring
Capacitance measurement
Microampere measurement
Amp-Tip function
Low-pass filter
The Beha AMP-320-EUR is a DC/AC current clamp, specifically designed for the maintenance of electric motors. The device enables precise true RMS measurements and is used for testing motor rotation direction and rotating field direction in 3-phase systems. It is designed for measuring DC and AC current in the range of 0.00 to 600 A, as well as DC and AC voltage from 0.00 to 600 V. The clamp opening is 35 mm, allowing use on conductors with a diameter up to 35 mm. The clamp features inrush current monitoring during motor start-up to analyze starting current and detect potential faults early.
Applications
The AMP-320-EUR is primarily designed for the maintenance and diagnosis of electric motors in industrial and commercial facilities. It is suitable for checking electrical parameters during operation and during commissioning. The rotation direction and rotating field testing functions support rapid identification of faults in motor control. The clamp is also suitable for testing frequency converters, as it features a low-pass filter that reduces interference from high frequencies. Temperature measurement with switching between °C and °F allows monitoring of motor and ambient temperatures.
Functions and Equipment in Detail
The device enables microampere measurements, for example on flame sensors, making it usable for applications in fire and gas monitoring. Capacitance measurement on start-up and running capacitors of electric motors supports diagnosis of capacitor wear. The Amp-Tip function allows current measurement at hard-to-reach locations by combining the clamp with a special probe. The safety specification CAT IV 600 V ensures safe use in high-voltage environments, such as those found in industrial networks.
Technology Explained Simply
True RMS measurement ensures that even non-sinusoidal AC currents are accurately captured, which is important for modern frequency converters and electronic loads. The low-pass filter reduces high-frequency interference that can occur during measurements on frequency converters, enabling more stable and accurate readings. Temperature measurement is performed via an integrated thermocouple input, with the display switchable between Celsius and Fahrenheit. The 35 mm clamp opening is sufficient for most industrial conductors and cables in the intended application.
Compatibility and Accessories
The AMP-320-EUR is designed for use with standard network cables and electrical conductors. The clamp is designed for use in electrical installations with a safety class CAT IV 600 V, ensuring high safety during measurements in main distribution boards and industrial networks.
Mounting and Installation
The clamp is simply closed around the conductor to be measured. No additional mounting or installation is required. Operation is via buttons on the front of the device, with the display showing measurement values in real time. The clamp is compact and allows quick measurements without additional tools.
Operational Advantages
The combination of true RMS measurement, rotating field testing, temperature measurement, and capacitance measurement in a single device reduces the number of required measuring instruments. Inrush current monitoring during motor start-up enables precise analysis of start-up behavior. The CAT IV 600 V specification ensures safe use in heavily loaded electrical installations. The Amp-Tip function extends usability to hard-to-reach measurement points.
Protection Rating
The clamp is designed for use in electrical installations with a safety class CAT IV 600 V, ensuring safe operation in high-voltage environments. The low-pass filter reduces high-frequency interference that can occur during measurements on frequency converters, enabling more stable and accurate readings. Temperature measurement is performed via an integrated thermocouple input, with the display switchable between Celsius and Fahrenheit. The 35 mm clamp opening is sufficient for most industrial conductors and cables in the intended application.
Compatibility and Accessories
The AMP-320-EUR is designed for use with standard network cables and electrical conductors. The clamp is designed for use in electrical installations with a safety class CAT IV 600 V, ensuring high safety during measurements in main distribution boards and industrial networks.
Mounting and Installation
The clamp is simply closed around the conductor to be measured. No additional mounting or installation is required. Operation is via buttons on the front of the device, with the display showing measurement values in real time. The clamp is compact and allows quick measurements without additional tools.
Operational Advantages
The combination of true RMS measurement, rotating field testing, temperature measurement, and capacitance measurement in a single device reduces the number of required measuring instruments. Inrush current monitoring during motor start-up enables precise analysis of start-up behavior. The CAT IV 600 V specification ensures safe use in heavily loaded electrical installations. The Amp-Tip function extends usability to hard-to-reach measurement points.
Note: Batteries are not included in the delivery scope.