Axis 02370-001, EAN: 7331021076518

Axis 02370-001 WRLS IP-Audio Audio Bridge C8110

Axis 02370-001 WRLS IP-Audio Audio Bridge C8110

Lieske Part No. 1929036
Mfg Part No 02370-001
EAN-Code 7331021076518
Manufacturer Axis
Here only 264,84 EUR
315,16 EUR incl. VAT

Further information for Axis 02370-001 WRLS IP-Audio Audio Bridge C8110

General
Operating voltagePoE
Audio inputAnalogue
Integrated softwareAXIS Audio Manager Edge
Base standardopen standards
SIP supportYes
I/O for buttons and relaysYes
The AXIS C8110 Network Audio Bridge is a network component from the manufacturer Axis, specifically developed for connecting and integrating analog and digital audio systems. It serves as a bridge between existing analog speaker and signal distribution systems and modern IP-based audio networks. The unit enables the use of functions such as zone management and content scheduling in analog systems through the integrated AXIS Audio Manager Edge software. SIP support allows connection to IP telephony systems, enabling announcements to be played over analog speakers. An analog audio input allows the combination of IP-based devices such as intercom systems or music streaming boxes with Axis network speakers.

Network component for audio integration
The AXIS C8110 functions as a central interface connecting analog audio sources with IP-based audio networks. It is built on open standards, enabling flexible and future-proof integration into existing or new systems. The unit is particularly suitable for users who do not wish to fully replace existing analog installations but instead wish to gradually extend them with modern IP technologies. SIP (Session Initiation Protocol) support enhances functionality by enabling communication with IP telephony systems, allowing voice messages or announcements to be played over analog speakers.

Functions and equipment in detail
The Audio Bridge features inputs and outputs for buttons and relays, which can be used to control audio functions or integrate into existing alarm or signaling systems. The integrated AXIS Audio Manager Edge enables centralized control of audio content, including assigning content to specific zones and scheduling playback times. The combination of analog and network audio is achieved via the analog audio input, which allows signals from IP-based devices such as intercom systems or streaming boxes to be transmitted to network speakers. The unit is designed to integrate seamlessly into existing systems without requiring extensive modifications to existing cabling or infrastructure.

Technology explained simply
The AXIS C8110 uses PoE (Power over Ethernet) to enable both power supply and data transmission over a single network cable. The use of open standards ensures high compatibility with various IP networks and audio systems. SIP support enables communication with IP telephony systems, allowing voice messages to be played over analog speakers. The integrated AXIS Audio Manager Edge software enables centralized control of audio content, including assigning content to specific zones and scheduling playback times.

Compatibility and accessories
The AXIS C8110 is compatible with a wide range of IP networks and audio systems based on open standards. Suitable accessories include Managed PoE+ and PoE++ switches such as the T8516, T8524, T8504-R, T8504-E, T8508, and D8248, as well as Unmanaged PoE switches such as the D8004. Additional accessories include microphones such as the T8351 MK II, T8353A, TU1002-VE, and the digital microphone T8355, as well as volume controllers such as the C8310. For audio content storage, Surveillance Cards are available in various capacities (128 GB, 256 GB, 512 GB, 1 TB). The use of these components enables flexible expansion and adaptation of the audio system to specific requirements.

Mounting and installation
The installation of the AXIS C8110 is carried out via a network cable that simultaneously provides power (PoE) and data transmission. The unit can be connected to a suitable network port, with the use of a PoE-capable switch recommended. The inputs and outputs for buttons and relays allow integration into existing control and signaling systems. Configuration is performed via the integrated AXIS Audio Manager Edge software, which is accessible over the network. The setup is designed to be carried out without requiring specialized technical knowledge, with integration into existing systems facilitated by support for open standards.

Advantages in operation
The AXIS C8110 offers a flexible and cost-efficient way to combine existing analog audio systems with modern IP technologies. SIP support enables the use of IP telephony systems for announcements, extending the system’s functionality. The integrated AXIS Audio Manager Edge software enables centralized control of audio content, simplifying system maintenance and management. High compatibility with various IP networks and audio systems ensures a flexible and future-proof solution.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1929036
qrcode für Axis 02370-001 WRLS IP-Audio Audio Bridge C8110