Further information for Aten EA1440 pressure and temperature sensor PE series
Features
Connectivity technology
Wired
Suitable for
Door
Product colour
Grey
Housing material
Plastic
Logistics data
Products per master (outer) case
140 pc(s)
Master (outer) case width
380 mm
Master (outer) case length
140 mm
Master (outer) case height
450 mm
Master (outer) case net weight
17.5 kg
Master (outer) case gross weight
18 kg
Packaging content
Screws included
Packaging data
Package width
85 mm
Package depth
110 mm
Package height
45 mm
Package weight
125 g
Technical data
Length packaging
0.110m
Weight
0.125kg
Packaging volume
0.0004m³
Width packaging
0.085m
Height packaging
0.045m
Weight & dimensions
Weight
125 g
For the security of your data center, ATEN provides Photo Door sensor probes that work in tandem with the Power Distribution Units, which allows the monitoring of a rack mounted enclosure´s door access, notifying users when a door has been opened. Various conditions can be monitored with alarms according to customizable minimum/maximum settings.
* The Sensor is an optional accessory and you can use the ATEN PDU without the door sensors. However, if you want to have complete security management of your data center with the full use of ATEN solutions, a sensor installation is required.
**Support PE7/PE8/PE9 series only
The Photo Door Sensor allows the monitoring of a rack mounted enclosure´s door access – notifying users when a door has been opened
High sensitivity
Easy operation
Sensing distance10 cm
Operating voltage10 – 30 VDC; Ripple
Current Consumption30 mA (max.)
Output methodNPN & PNP Two Output
Output statusNormal open NO type
Output current150 mA (max.)
Leakage current0,8 mA (max.)
Residual voltage0,6 mA (max.)
Protection circuitShort Circuit and Polarity Protection
Sensor Response Time1 ms (max.)
Sensitivity adjuster270° Trimmer
Hysteresis10 % of Sensing Distance Max
EmitterInfrared LED
IlluminationSunlight
Physical Properties
HousingPlastic
Package Contents
1x Photo Door Sensor
1x Adjustment Tool
2x Screw
1x Bracket
1x hook-and-loop