Further information for APC SRT1500XLI UPS 1500 VA RM 230 V
Battery
Battery technology
Sealed Lead Acid (VRLA)
Battery life (max)
5 year(s)
Battery recharge time
3 h
Hot-swap battery
Certificates
Compliance certificates
RoHS
Certification
CE, EAC
Design
Form factor
Rackmount/Tower
Cable length
1.83 m
Product colour
Black
Display type
LCD
International Protection (IP) code
IP20
LED indicators
Features
UPS topology
Double-conversion (Online)
Output power capacity
1.5 kVA
Output power
1500 W
Waveform
Sine
Input operation voltage (min)
100 V
Input operation voltage (max)
275 V
Input frequency
40/70 Hz
Output operation voltage (min)
220 V
Output operation voltage (max)
240 V
Output frequency
50/60 Hz
Surge energy rating
432 J
Crest factor
3:1
Noise level
50 dB
Emergency Power Off (EPO)
Audible alarm(s)
Logistics data
Products per pallet
12 pc(s)
Harmonized System (HS) code
85078000
Total carbon footprint (kg of CO2e)
2573.19
Operational conditions
Operating temperature (T-T)
0 - 40 °C
Storage temperature (T-T)
-20 - 50 °C
Operating relative humidity (H-H)
0 - 95%
Storage relative humidity (H-H)
0 - 95%
Packaging content
Management card included
Manual
Packaging data
Package width
594 mm
Package depth
749 mm
Package height
246 mm
Package weight
29.6 kg
Ports & interfaces
AC outlet types
C13 coupler
AC outlets quantity
6 AC outlet(s)
Serial interface type
RJ-45
USB port
Serial interface
SmartSlot
SmartConnect port
Sustainability
Sustainability certificates
Green Premium
Weight & dimensions
Width
85 mm
Depth
505 mm
Height
432 mm
Weight
20.5 kg
The APC Smart-UPS SRT1500XLI is a high-performance UPS system with double-conversion online technology, designed for use in critical IT infrastructures. The device offers an output capacity of 1.5 kVA and an output power of 1500 W, with power supply via a sine wave form required for sensitive electronic devices such as servers, network equipment, or medical devices. The UPS topology ensures continuous power supply without interruption, as the inverter is permanently active and supplies the load directly from the inverter, independent of the mains. This protects connected devices from voltage fluctuations, disturbances, and outages in the public power grid.
Applications include primarily server rooms, data centers, network centers, and other environments where uninterrupted power supply is crucial. The input operating voltage ranges from 100 V to 275 V, allowing high tolerance to voltage fluctuations. The output operating voltage is maintained at a stable level between 220 V and 240 V to optimally supply connected devices. The output frequency is 50/60 Hz, ensuring compatibility with international devices. The input frequency of 40/70 Hz allows operation even with irregular mains frequencies.
Functions and equipment in detail include six AC outlets with C13 connectors, suitable for supplying standard IT devices. The USB interface and the serial interface (RJ-45) enable communication with a computer or network management system to monitor the UPS operating status and control automated shutdown procedures during power failure. The device features a SmartSlot, enabling the installation of management cards such as the AP9640 or AP9641 to activate advanced monitoring functions like environmental monitoring or remote maintenance. An Emergency Power Off (EPO) is integrated to allow immediate shutdown of the load in emergencies.
Technology explained simply shows that double-conversion technology provides high efficiency and reliability, as power continuously flows through the inverter. The battery technology is based on sealed lead-acid batteries (VRLA), with a maximum lifespan of five years. The battery recharge time is three hours, enabling rapid restoration of backup power capacity after discharge. The hot-swap battery function allows battery replacement without interrupting power supply, which is advantageous for critical applications. The noise level is 50 dB, acceptable for a rack system in a server room. Audible signals indicate operating status or faults.
Compatibility and accessories include the option to extend runtime using external battery packs such as the SRT48BP. The battery UPS RBC155 48 V 9 Ah is a suitable replacement part. The Network Management Card AP9641 offers environmental monitoring functions, while the AP9640 enables advanced network control. The DRY CONTACT I/O ACCESSORY can be used for additional input/output signals. The UPS is designed for use in rackmount/tower configurations, with installation in a 2U rack possible. The cable length is 1.83 m, allowing flexible placement.
Installation and mounting require adherence to safety regulations, particularly avoiding direct sunlight, liquids, and excessive dust or humidity. Airflow must be ensured, and installation in a rack involves mounting battery packs at the bottom and the UPS above. The operating temperature ranges from 0 °C to 40 °C, and the storage temperature from -20 °C to 50 °C. The relative humidity during operation is 0 to 95 %, without condensation.
Operational advantages include high reliability, continuous power supply, easy integration into existing IT infrastructures, and the ability to scale runtime using external batteries. The certification includes CE, EAC, and compliance with RoHS. The device is intended for indoor use and is not intended for consumers in the EU. The product color is black, the display type is LCD, and there are LED indicators for operating status. The International Protection (IP) rating is IP20, providing protection against solid objects larger than 12.5 mm, but not against water.
The device is supplied with an operating manual explaining installation, operation, and maintenance.