| Ports & interfaces |
| Input connection type | IEC 309 32A 3P+N+PE |
| Output connections | (1) IEC 309 32A |
| Power |
| Nominal input voltage | 400 V |
| Nominal output voltage | 400 V |
| Maximum input current per phase | 32 A |
| Maximum total current draw per phase | 32 A |
| Weight & dimensions |
| Weight | 3.69 kg |
The APC IT power distribution module, type PDM3532IEC-500, is a three-phase power distribution module for use in IT infrastructures, particularly in data centres. It is designed for distributing electrical power from a main power source to individual loads, and is installed in rack systems. The module features an IEC 309 32A 3P+N+PE plug at the input, enabling a secure and standardized connection to the power supply. At the output, it has a single IEC 309 32A socket outlet, designed for supplying devices with a nominal voltage of 400 V and a maximum current of 32 A per phase. Power distribution is achieved via a 5-core cable with a length of 500 cm, allowing flexible positioning of connected devices.
Applications
This module is specifically designed for use in IT infrastructures where reliable and flexible power supply is required. It is particularly suitable for data centres, where power distribution requirements frequently change. The modular design enables easy repositioning of power distribution, simplifying adaptation to changing requirements. Standardizing power distribution through uniform modules supports consistency in power supply across different corporate locations.
Functions and Equipment in Detail
This power distribution module is pre-assembled and tested at the factory. It includes integrated circuit breakers, power cables, and connection components, enabling quick and secure installation. Automatic detection of modules by the PDU reduces installation time. The modules are designed to be installed in less than ten minutes without tools. The status indicator provides a quick overview of the module’s operating condition.
Technology Explained Simply
The module operates at a nominal voltage of 400 V and a maximum current of 32 A per phase. The use of the IEC 309 plug ensures a standardized and globally recognized interface, compatible with many power supply systems. Power distribution is carried out via a 500 cm long cable, providing sufficient reach for connecting to devices in rack systems.
Compatibility and Accessories
The module is designed for use in rack systems and can be installed in vertical and horizontal rack distribution panels. It is compatible with APC systems, particularly with power distribution units (PDUs) that support modular installation. The modules are designed to integrate into existing infrastructures without requiring additional modifications. The use of form-fitting connectors prevents accidental disconnection, enhancing safety.
Installation and Mounting
Installation is factory pre-assembled and requires no additional components. The module is inserted into the PDU’s slot, with the locking mechanism released by pressing the red button. Cables are routed through the upper opening in the housing and guided through the cable saddles. After installation, the locking mechanism is closed to securely connect the module to the busbar. The filler plates, which cover the busbar in the delivered state, must be removed during installation. The insert locks, which block access to the busbar, are removed using the included key.
Operational Advantages
The module offers high power density at low cost for power distribution. The modular design enables flexible adaptation to changing requirements. Integrated power monitoring and measurement allow precise control and optimization of power consumption. Insulation at all contact points improves user safety. Simple installation and maintenance reduce operational effort. Standardization of power distribution supports consistency and efficiency in IT infrastructure.