Alarm when on battery, Low battery alarm, Overload alarm
Surge protection
Audible alarm(s)
Logistics data
Harmonized System (HS) code
85078000
Operational conditions
Operating temperature (T-T)
0 - 40 °C
Operating relative humidity (H-H)
0 - 90%
Other features
Battery type
leakproof
Output voltage
230 V
Packaging content
Management card included
Packaging data
Package width
143 mm
Package depth
373 mm
Package height
237 mm
Package weight
4.8 kg
Ports & interfaces
AC outlet types
C13 coupler
AC outlets quantity
1 AC outlet(s)
SmartSlot
SmartConnect port
Weight & dimensions
Width
160 mm
Depth
305 mm
Height
92 mm
Weight
4.5 kg
The APC Easy UPS BV650I is an uninterruptible power supply (UPS) of line-interactive topology, designed for use in home and small office environments. With an output capacity of 0.65 kVA and an output power of 375 W, the device provides sufficient power supply for sensitive electronics such as routers, modems, VoIP phones, PCs, or gaming consoles. The UPS ensures stable power supply during voltage fluctuations and does not interrupt the operation of connected devices when the mains power fails. The output voltage is 230 V, and the waveform is a sine wave, which is important for sensitive devices. The input voltage range is between 170 V and 280 V, enabling adaptation to irregular mains voltages. Frequency regulation is synchronized with the mains at 50/60 Hz. The transition time from mains to battery operation is 6 ms, which is sufficient for most devices to maintain safe operation. The device features an integrated surge protection and acoustic alarm functions, which are activated during battery operation, low battery charge, or overload. The noise level is 40 dB, ensuring quiet operation.
Applications
The APC BV650I is particularly suitable for use in home and small office environments where reliable power supply for network devices and IT end devices is required. The UPS can be installed in various environments, including structured cabling enclosures, behind desks, in basements or garages, thanks to the integrated wall mounting brackets. The compact design with dimensions of 92 mm (height) × 160 mm (width) × 305 mm (depth) allows for flexible placement. The cable length is 1.52 m, providing sufficient reach for most applications.
Functions and Equipment in Detail
The UPS features six IEC outlets (C13 connectors), suitable for powering multiple devices. The outputs are equipped with automatic voltage regulation (AVR), which corrects voltage sags and surges without discharging the battery. This extends the battery life and protects connected devices. The battery is maintenance-free and of the leakproof type, with a lifespan of up to five years. Charging occurs even when the device is turned off, ensuring constant readiness. A Cold-Start function enables restarting the UPS even without mains power. The battery self-diagnosis informs about the battery condition and triggers appropriate alarms if necessary.
Technology Explained Simply
The line-interactive topology means that the UPS passes through the mains power directly during normal operation, but actively intervenes during voltage fluctuations to stabilize the output voltage. This is achieved through automatic voltage regulation (AVR), which operates without battery power. In the event of a complete power failure, the UPS switches to internal battery power within 6 ms to continue supplying connected devices. The sine wave output voltage is important for sensitive electronics such as computers or network devices, as it provides clean power without disturbances. The input voltage range of 170 to 280 V allows operation even with highly fluctuating mains voltages, which is advantageous in regions with unstable power grids.
Compatibility and Accessories
The UPS is equipped with six IEC outlets (C13), suitable for a wide range of IT and network devices. The devices are designed for operation at 230 V. The UPS is not equipped with a SmartSlot or SmartConnect interface, so network control or remote monitoring via these interfaces is not possible. The UPS is designed for use in environments with an operating temperature of 0 to 40 °C and relative humidity of 0 to 90 %. The CE and RoHS certifications confirm compliance with European safety and environmental standards.
Mounting and Installation
The UPS can be placed on a surface or mounted on the wall, thanks to the integrated wall mounting brackets. The compact design allows for flexible placement in various environments. The cable length of 1.52 m provides sufficient clearance for connecting to the mains. Installation requires no special tools, as the connectors are standardized. The UPS is suitable for use in structured cabling enclosures, behind desks, in basements or garages.
Operational Advantages
The APC BV650I provides reliable power supply for sensitive devices, especially in environments with unstable power grids. The automatic voltage regulation (AVR) protects the battery and extends its lifespan. The acoustic alarms inform the user of critical conditions such as battery discharge or overload. The Cold-Start function enables restarting even without mains power, which is beneficial during power outages. The integrated battery self-diagnosis ensures early detection of battery issues. The UPS is designed for an operating temperature of 0 to 40 °C, ensuring broad usability. The CE and RoHS certifications confirm the safety and environmental compatibility of the device.