APC APCRBC155, EAN: 0731304330004

APC APCRBC155 battery for various devices

UPS > UPS-Batteries > Original

APC APCRBC155 battery for various devices

Lieske Part No. 599845
Mfg Part No APCRBC155
EAN-Code 0731304330004
Manufacturer APC
Here only 804,87 EUR
957,80 EUR incl. VAT

Further information for APC APCRBC155 battery for various devices

Battery
Battery technologyLead acid
Certificates
Compliance certificatesRoHS, REACH, WEEE
Waste Electrical and Electronic Equipment (WEEE) complianceYes
Features
Product colourBlack
Logistics data
Quantity per pack12 pc(s)
Customs product code (TARIC)8507208090
Harmonized System (HS) code85044095
Total carbon footprint (kg of CO2e)109.1507635771514
Country of originPhilippines
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 45 °C
Operating relative humidity (H-H)0 - 95%
Storage relative humidity (H-H)0 - 95%
Packaging data
Package width343 mm
Package height203 mm
Package depth635 mm
Package weight17.6 kg
Technical details
Packaging recycled materialsRecycled cardboard
SCIP number25764278-9ac2-4c03-941a-d133167ad10f
Sustainable packagingNo
Proposition 65Yes
Take-back systemNo
Packaging without single use plasticNo
Weight & dimensions
Weight15.3 kg
Width160 mm
Height75 mm
Depth420 mm
The APC replacement battery APCRBC155 is an original replacement module for Uninterruptible Power Supplies (UPS) of the Smart-UPS On-Line series. As a lead-acid battery with a nominal voltage of 12 V and a capacity of 75 Ah (according to technical specifications), it serves as an energy source during backup operation, ensuring continued power supply to connected devices in case of a power outage. The battery is specifically designed for models SRT1000XLA, SRT1000RMXLA, SRT1000RMXLA-NC, SRT1500XLA, SRT1500RMXLA, SRT1500RMXLA-NC, as well as for external battery packs such as SRT48BP and SRT48RMBP. The original APC RBC (Replacement Battery Cartridge) is tested and certified for 100% compatibility with the mentioned UPS models, ensuring reliable and safe operation.

Applications

The APCRBC155 is used in IT infrastructures where continuous power supply is critical, for example in server rooms, network centers, or with medical devices. It is part of a larger UPS system that takes over the load during a power failure to prevent data loss or damage to sensitive electronics. The battery is designed for indoor use and can operate at ambient temperatures between 0 °C and 40 °C and relative humidity from 0 to 95 %. For storage, temperatures from -15 °C to 45 °C and humidity from 0 to 95 % are permissible.

Functions and Equipment in Detail

The battery is delivered fully assembled and ready for use, so it can be directly inserted into the UPS device. According to the manufacturer, the service life is three to five years, although the actual lifespan depends on operating frequency, ambient temperature, and charge cycles. The battery is housed in a black housing that includes the necessary connections and a handle for safe handling. The lead-acid technology offers a balanced combination of performance, lifespan, and ease of maintenance. The battery is designed for stationary systems and is not intended for mobile applications.

Technology Explained Simply

A lead-acid battery stores electrical energy chemically in the form of lead, lead oxide, and sulfuric acid. During discharge, chemical energy is converted into electrical energy; during charging, the reverse process occurs. The APCRBC155 is a maintenance-free lead-acid battery that does not require regular maintenance, although it may have a reduced lifespan under high temperatures or frequent deep discharges. The battery is automatically charged in the UPS system as soon as mains power is restored. After installation, the battery reaches approximately 90 % of its capacity within the first three hours; full charge capacity is only achieved after completing a full charge cycle.

Compatibility and Accessories

The APCRBC155 is specifically developed for the mentioned Smart-UPS On-Line models and can only be used in these systems. Compatibility is ensured through manufacturer tests and certifications. The battery is not suitable for other UPS models or manufacturers. For installation, the integrated handle is intended to safely insert the module into the UPS device or external battery packs (XLBP). It is important to use only identical replacement batteries to ensure system safety and performance.

Installation and Mounting

Mounting is done by inserting the module into the designated battery compartment of the UPS device. The handle is intended solely for sliding the module, not for lifting or carrying the battery, as it weighs 15.3 kg. Installation must follow the manufacturer’s instructions, including safety guidelines. After installation, the installation date is automatically displayed on the UPS screen. If this does not occur, the date can be set manually in the configuration menu under “Battery”. After completing a full charge cycle, a self-test and runtime calibration must be performed to verify functionality.

Operational Advantages

Using an original APC replacement battery ensures optimal performance and safety of the UPS system. The 100% compatibility minimizes the risk of malfunctions or damage to the device. The three- to five-year service life provides long-term operational reliability, although the battery gradually loses capacity over time. The lead-acid technology is robust and cost-effective, and the battery must be returned according to legal regulations after end-of-life. The battery is equipped with RoHS, REACH, and WEEE compliance certifications, emphasizing environmental compatibility and the manufacturer’s take-back obligation. The packaging is made of recycled cardboard, supporting the product’s sustainability.

Certifications and Environment

The APCRBC155 complies with the RoHS directive (Restriction of Hazardous Substances in electrical and electronic equipment), the REACH regulation (Registration, Evaluation, Authorisation and Restriction of Chemicals), and the WEEE directive (Waste Electrical and Electronic Equipment). The battery contains lead, which in the EU falls under the WEEE directive and must be legally returned. Return can be done at municipal collection points, recycling centers, or retailers who sell batteries. The packaging is made of recycled cardboard, reducing environmental impact.

Warranty and Service

The APCRBC155 is supplied with a two-year warranty. For questions regarding return or disposal of used batteries, APC customer service is available. The manufacturer’s take-back obligation applies only to batteries of the same type that are available in their product range. Return can be made to the retailer, municipal collection points, or to the shipping warehouse in Seligenstadt, Germany.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/599845
qrcode für APC APCRBC155 battery for various devices