Design
PDU types	Metered, Switched
Type	Single-phase
Rack capacity	0U
Mounting	Vertical
Product colour	Black
Features
Cable length	3.05 m
Operational conditions
Operating temperature (T-T)	-25 - 65 °C
Storage temperature (T-T)	-5 - 45 °C
Operating relative humidity (H-H)	5 - 95%
Storage relative humidity (H-H)	5 - 95%
Packaging data
Package weight	9.95 kg
Package width	165 mm
Package depth	124 mm
Package height	2040 mm
Ports & interfaces
AC outlets quantity	24 AC outlet(s)
Power plug	IEC309
AC outlet types	C13 coupler, C19 coupler
Input connection type	IEC 309 32A 2P+E
Output connections	(21) IEC 320 C13, (3) IEC 320 C19
Power
AC input frequency	50 - 60 Hz
Maximum input current per phase	32 A
Maximum total current draw per phase	32 A
Weight & dimensions
Width	56 mm
Depth	46 mm
Height	1829 mm
Weight	7.59 kg

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces.