Features
Cable length	1.83 m
Weight & dimensions
Weight	290 g

This product is a parallel cable from APC, type 37006-2M-E, designed for connecting devices via the parallel interface standard IEEE 1284. It is a straight, 1:1 cable with DB25 connectors at both ends, intended for data transmission between computers and peripheral devices such as printers. The cable length is 1.83 metres, providing sufficient reach for typical working environments. The cable is specified to IEEE 1284, a standard that defines communication over parallel interfaces and ensures compatibility between different devices.

The cable connects two DB25 connectors directly, enabling a direct, unaltered data path between the connected devices. This configuration is referred to as “straight through”, as no rerouting or re-wiring of signal lines occurs. The use of a straight cable is required when devices communicate via parallel interfaces, for example, when connecting a printer to a computer.

The IEEE 1284 standard defines the electrical and logical characteristics of the parallel interface, including signal transmission, data rate, and communication control. This standard is particularly used in connecting computers to printers and other peripheral devices. Compliance with this standard ensures reliable and compatible data transmission between devices.

At both ends of the cable, DB25 connectors are mounted, which are typical for parallel interfaces. These connectors feature 25 contacts and enable the transmission of data, control, and status signals. The use of DB25 connectors is widespread in older computers and printers, especially in environments where parallel interfaces are still in use.

The integrated design prevents mechanical stress on the connectors. The built-in shape ensures that the cable is not bent or stressed directly at the connector, which extends the cable’s lifespan and maintains a stable connection.

The cable has a length of 1.83 metres, providing sufficient reach for use in offices or workstations without making the cabling excessively long or cluttered. The weight is 290 grams, which is typical for a cable of this length and design, and does not impose special requirements for mounting or securing.

The cable is primarily intended for connecting computers to printers or other peripheral devices via parallel interfaces. It is used in environments where parallel interfaces are still in use, for example, in older office setups, industrial control systems, or with special printers that communicate via a parallel connection. The application is for stationary installations where a fixed, reliable connection is required.

The cable is compatible with devices equipped with a DB25 connector for parallel interfaces. It can be connected to computers, printers, and other peripheral devices that support the IEEE 1284 standard. No special accessories are required, as the connection is made directly via the DB25 connectors. The use of adapters or additional converters is not intended, as the cable already provides the required interface.

Installation is performed by simply plugging the DB25 connectors into the corresponding sockets on the devices. The integrated screw clamp at the connector ensures a secure connection and prevents accidental disconnection. The cable length of 1.83 metres allows flexible placement of the devices without requiring additional extensions or bends. Installation does not require special tools or technical expertise.

The cable provides reliable and stable data transmission over parallel interfaces. Compliance with the IEEE 1284 standard ensures compatibility with a wide range of devices. The integrated screw clamp at the connector enhances mechanical stability and extends the cable’s lifespan. The cable length of 1.83 metres offers sufficient flexibility for use in typical working environments without making the cabling excessively long or cluttered. The simple installation and direct connection without additional adapters or converters simplify operation and reduce the risk of errors.