Unrestricted freedom of installation
With the ALLNET ALL0488V6 Power over Ethernet injector, you can install your PoE-capable IP devices such as WLAN access points, VoIP telephones and much more completely independently of existing power sockets.
For example, the most ideal installation locations in a building can be selected for WLAN access points without having to pay attention to the power cabling.
Switches that are not PoE-capable can be retrofitted with Power over Ethernet at low cost, especially if you only need a few ports with PoE supply. Here the ALL0488V4 saves you having to purchase a PoE switch.
The ALLNET ALL0488V6 supports the IEEE802.3af Element Specification Supported Standards: IEEE802.3at Power over Ethernet PoE+ IEEE802.3af Power over Ethernet IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE802.ab 1000BaseT Ethernet Ports: 1x RJ45 10/100/1000Mbps for connection for passive switch or hub 1x RJ45 10/100/1000Mbps for connection to PoE end device Power supply: 100 - 240VAC, internal power supply Power consumption: 30 watts maximum with PoE end device connected Housing: plastic housing Dimensions: length/width/height: 135 x 60 x 30 mm Environment: Operating temperature: 0 ~ 40 °C
Operating humidity: 10% ~ 90% (non-condensing)
Storage temperature: -20 ~ 90 °C
Storage humidity: 5% ~ 90% (non-condensing) Marking: CE FCC Class A ALLNET PoE injector Gigabit PoE < PoE+ (15.4W/30W) / plastic housing / ALL0488v6 power cable 230V UK plug/cold devices IEC-C13 (socket), 2m, black