Allnet ALL-GHN101-2wire, EAN: 4038816048516

Allnet ALL-GHN101-2wire G.hn Modem 2-wire

Networks > VDSL

Allnet ALL-GHN101-2wire G.hn Modem 2-wire

Lieske Part No. 632431
Mfg Part No ALL-GHN101-2wire
EAN-Code 4038816048516
Manufacturer Allnet
Here only 100,92 EUR
120,09 EUR incl. VAT

Further information for Allnet ALL-GHN101-2wire G.hn Modem 2-wire

General
Network standardITU G.9960 G.hn over telephone line
Ethernet standardIEEE 802.3u 100M Fast Ethernet, IEEE 802.3ab 1000M Gigabit Ethernet
Energy efficiencyIEEE 802.3az Energy Efficiency Ethernet
Ethernet connectionstwo RJ-45 connectors
G.hn connectionstwo RJ-11 connectors
G.hn transmission power6 +/- 1 dBm
G.hn frequency range6 ~ 76 MHz
Maximum range350 Metres
Measured net data rates60m: 251 MBit/s, 100m: 241 MBit/s, 200m: 201 MBit/s, 300m: 92 MBit/s
EncodingAES 128
Ethernet interface100/1000Mbps Auto Negotiation, MDI/MDI-X Auto Crossover
Quality of ServicePrioritization based on IEEE 802.1p
LED indicatorsPower, G.hn Link/Activity/Quality, Ethernet Link/Activity (x2)
Operation temperature0 °C to 50 °C
Storage temperature–10 °C to 65 °C
Power consumption3,5 W at 12 V
MountingWall mounting possible
Accessories included in deliveryPower adaptor
The Allnet ALL-GHN101-2wire is a G.hn modem for use over existing telephone lines using the 2-wire method. It serves as a Gigabit Ethernet bridge to extend a private network within a building without the need to lay additional network cables. The connection is established over existing telephone lines, with G.hn technology (ITU G.9960) as the basis, enabling data rates up to 251 MBit/s over distances up to 350 meters. Measured net data rates are 251 MBit/s over 60 m, 241 MBit/s over 100 m, 201 MBit/s over 200 m, and 92 MBit/s over 300 m. Transmission occurs in the frequency range of 6 to 76 MHz, where coexistence with ADSL or VDSL is not guaranteed due to overlapping frequencies. Therefore, the unit is not compatible with VDSL connections intended to operate on the same line.

Applications
This device is suitable for use in residential and office buildings where existing telephone lines are to be used for network connections. It enables the connection of Ethernet terminals such as PCs, set-top boxes, TV devices, or WLAN access points over the telephone line. The point-to-point connection is specifically designed for use in a 2-wire system, where multiple G.hn connections in a multi-pair cable are not possible, as this would cause crosstalk. For multi-pair cable systems, Allnet offers VDSL2 Vectoring technology.

Functions and Equipment in Detail
The modem features two RJ-45 ports for Gigabit Ethernet (100/1000 Mbps) with Auto-Negotiation and MDI/MDI-X Auto-Crossover. This allows direct connection to DSL modems, cable modems, FTTH end devices, or other Ethernet end devices. An integrated analog telephone splitter enables simultaneous use of the telephone line for broadband and telephony applications. Signal quality is indicated via an LED display (G.hn Link/Activity/Quality). Additionally, two LED indicators are provided for the Ethernet connections (Link/Activity). Data transmission is secured using AES-128 encryption.

Technology Explained Simply
The G.hn technology uses existing telephone lines as a transmission medium for high-speed data. The frequency bandwidth of 6 to 76 MHz enables high data rates, although compatibility with ADSL/VDSL is not possible due to frequency overlap. The maximum range of 350 meters depends on real-world conditions, including line quality and the number of connections. Power supply is provided via an included power adapter delivering 12 V, with a power consumption of 3.5 W. The unit is suitable for wall mounting and has dimensions of 130 mm (W) × 95 mm (D) × 32 mm (H), weighing 135 g (without power adapter).

Compatibility and Accessories
The device is designed for use with existing telephone lines. Compatible accessories include RJ11 connectors (6P4C) in various configurations (for round and flat cables, 100-piece pack, 2-piece pack with terminal block/screw contact) as well as a crimping tool for RJ10/RJ11/RJ12/RJ-45 connectors. These components allow adaptation to different cable types and installation scenarios.

Installation and Mounting
Installation involves connecting the two RJ-11 connectors to the telephone line—one for the G.hn connection and the other for bypassing the telephone line. The Ethernet ports are connected to the respective devices. Wall mounting is possible, with the unit operating in an ambient temperature range of 0 °C to 50 °C and relative humidity of 10 % to 95 % (non-condensing). Storage temperature ranges from –10 °C to 65 °C.

Operational Advantages
Using the Allnet ALL-GHN101-2wire reduces the effort required for network extensions, as no new cables need to be laid. Energy efficiency (Energy Efficiency Ethernet, IEEE 802.3az) ensures low power consumption. The integrated QoS function (Quality of Service) enables prioritization of data traffic based on IEEE 802.1p, which is beneficial for transmitting sensitive applications such as VoIP or streaming. The LED indicators support quick diagnosis of connection and signal quality issues.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/632431
qrcode für Allnet ALL-GHN101-2wire G.hn Modem 2-wire