Allied Telesis AT-IMC2000T/SP-980, EAN: 0767035210582

Allied Telesis AT-IMC2000T/SP-980 Gigabit Media Converter 10/100/1000T to 100X/1000X

Networks > Wireless Networking > Access Points

Allied Telesis AT-IMC2000T/SP-980 Gigabit Media Converter 10/100/1000T to 100X/1000X

Lieske Part No. 1116609
Mfg Part No AT-IMC2000T/SP-980
EAN-Code 0767035210582
Manufacturer Allied Telesis
Here only 498,88 EUR
593,67 EUR incl. VAT

Further information for Allied Telesis AT-IMC2000T/SP-980 Gigabit Media Converter 10/100/1000T to 100X/1000X

Certificates
Compliance certificatesRoHS
SafetyUL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1 (TUV mark)
CertificationTAA EMI/Emission & Stability FCC Class A EN55024 (immunity standard) EN55032 Class A EN55035 VCCI Class A
Features
Product colourGrey
International Protection (IP) codeIP30
InternalNo
LED indicatorsYes
DIN rail mountingYes
Logistics data
Harmonized System (HS) code85176990
Network
Maximum data transfer rate1000 Mbit/s
Converter input interface10Base-T, 100Base-T, 1000Base-T
Converter output interface100Base-X, 1000Base-X
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Packet forwarding rate (10 Mbps)14880 pps
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (1 Gbps)1488000 pps
Jumbo frames10000
Duplex systemFull, Half
Jumbo frames supportYes
VLAN supportYes
Auto MDI/MDI-XYes
Auto-negotiationYes
Store-and-forwardYes
Operational conditions
Operating temperature (T-T)-40 - 75 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)5 - 95%
Storage relative humidity (H-H)5 - 95%
Operating altitude0 - 3048 m
Performance
Wavelength850 nm
Tx power (min)-9.5 dBmW
Tx power (max)-4 dBmW
Rx power (min)-17 dBmW
Rx power (max)-3 dBmW
Ports & interfaces
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
Fiber ports quantity1
Fiber optic connectorSFP
Power
Input voltage12 - 48 V
Weight & dimensions
Width111 mm
Depth96 mm
Height35 mm
Weight748 g
The Allied Telesis AT-IMC2000T/SP-980 is an industrial media converter of the IMC2000 series, designed for use in networks with high requirements for reliability and operating environments. It serves as a bridge between wired Ethernet connections (Twisted-Pair) and optical fiber cables via an SFP port. The converter enables the conversion of 10/100/1000Base-T signals into 100Base-X or 1000Base-X optical signals, allowing transmission over longer distances and in environments with electromagnetic interference. The maximum data transfer rate is 1000 Mbit/s, with the interface designed for both Fast Ethernet and Gigabit Ethernet. The Ethernet LAN data transfer rates include 10, 100, and 1000 Mbit/s, with packet forwarding rates of 14880 pps at 10 Mbit/s, 148800 pps at 100 Mbit/s, and 1488000 pps at 1 Gbit/s. The converter supports Jumbo frames up to a size of 10000 bytes, increasing efficiency when transmitting large data packets in modern networks. Support for VLANs (IEEE 802.1Q) and Store-and-Forward switching ensures transparent forwarding of network data without distorting the packet structure.

Applications

The AT-IMC2000T/SP-980 is designed for industrial applications, particularly in environments with high temperatures and mechanical stress. It is rated for operating temperatures from -40 to +75 °C and can withstand storage temperatures from -40 to +85 °C. The relative humidity during operation ranges from 5 to 95 %, without condensation. The maximum operating altitude is 3048 m, making it suitable for use in mountainous regions. The IP30 protection rating safeguards against entry of solid foreign objects, but not against water or dust. DIN rail mounting allows for flexible installation in enclosures. The operating voltage ranges from 12 to 48 V, enabling flexible power supply via various networks or external sources.

Functions and Equipment in Detail

The converter features an RJ-45 port for the Twisted-Pair connection and an SFP port for the optical fiber cable connection. The wavelength is 850 nm, typical for multimode fiber cables. The output power (Tx) ranges from -9.5 to -4 dBmW, and the reception power (Rx) ranges from -3 to -17 dBmW. These values ensure stable signal transmission over the intended distances. The Auto MDI/MDI-X function enables automatic adaptation of the connection, regardless of cable type (straight or crossover). The Auto-Negotiation function automatically detects the available speed and duplex mode. The converter supports both full- and half-duplex modes. LED indicators allow visual monitoring of the operating status.

Technology Explained Simply

The converter operates as a media bridge, converting data packets from a wired Ethernet port (RJ-45) into an optical signal and transmitting it via an SFP port. SFP modules can be exchanged according to requirements to support different fiber types (e.g., multimode, singlemode) or transmission distances. Support for Jumbo frames (up to 10000 bytes) reduces the number of packets that need to be transmitted over the network, improving network performance. The Store-and-Forward function ensures the entire data packet is received and checked before forwarding, enhancing data integrity. VLAN support allows logical separation of network segments without requiring physical cable separation.

Compatibility and Accessories

The converter is compatible with SFP modules supporting 100Base-X or 1000Base-X. The use of multimode fiber cables enables transmission distances up to 550 m at 1000 Mbit/s. SFP modules can be exchanged according to requirements to support different transmission paths or distances. Support for PoE+ (IEEE 802.3at) enables power delivery to remote devices such as IP phones, surveillance cameras, or wireless access points via the network cable. The maximum PoE power is 70 W, supporting all PoE+ devices compliant with IEEE 802.3at. The Remote Power Cycle function allows the device to be remotely reset via central network control, enabling remote device restarts without physical access. The Smart Missing Link (SML) function monitors the network connection and alerts when a connection is lost, speeding up troubleshooting.

Mounting and Installation

The converter can be installed either as a standalone device or mounted on a DIN rail, enabling flexible installation in enclosures or industrial controls. Mounting requires no additional tools, with the DIN rail directly installed in the enclosure. Power supply is provided via a voltage of 12 to 48 V, which can be supplied via an external power supply or a PoE source. The LED indicators serve as visual feedback for the operating status, enabling quick diagnosis of issues.

Operational Advantages

The AT-IMC2000T/SP-980 offers high operational reliability due to its robust construction and support for industrial operating conditions. The ability to support PoE+ reduces the need for additional power supplies at remote locations. The SFP modularity allows flexible adaptation to various network requirements. Support for Jumbo frames and VLANs increases network efficiency and enables structured network organization. Remote management functions such as Remote Power Cycle and Smart Missing Link reduce maintenance time and increase network availability. The fanless design ensures quiet operation, which is advantageous in sensitive environments.

Certifications and Compliance

The converter complies with safety standards UL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), and EN 60950-1 (TUV mark). Compliance with RoHS ensures environmental compatibility. Certification under TAA (Trade Agreements Act) is relevant for public contracts in the USA. Emissions comply with standards FCC Class A, EN55032 Class A, VCCI Class A, EN55024, and EN55035, ensuring compliance with electromagnetic compatibility (EMC).

Product Color and Design

The converter is gray and has a compact form factor with dimensions of 111 mm (width) × 96 mm (depth) × 35 mm (height). The weight is 748 g. The robust metal housing construction ensures mechanical stability and heat dissipation. The front side features LED indicators for operating status, while the rear side includes the RJ-45 and SFP ports as well as the power supply terminals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1116609
qrcode für Allied Telesis AT-IMC2000T/SP-980 Gigabit Media Converter 10/100/1000T to 100X/1000X