Further information for Allied Telesis AT-GS970M/10PS-30 Access Point 8x POE+ Ports
Data transmission
Switching capacity
20 Gbit/s
MAC address table
16000 entries
Latency (10-100 Mbps)
7.8 µs
Latency (1 Gbps)
3.4 µs
Packet buffer memory
1.5 MB
Jumbo frames support
Design
Product colour
Grey
Rack mounting
Management features
Switch type
Managed
Switch layer
L3
Quality of Service (QoS) support
Multicast features
Multicast support
Network
Networking standards
IEEE 802.2, IEEE 802.3
Number of VLANs
2048
10G support
Port mirroring
Full duplex
IP routing
Flow control support
Spanning tree protocol
VLAN support
Operational conditions
Operating temperature (T-T)
0 - 50 °C
Storage temperature (T-T)
-25 - 70 °C
Operating relative humidity (H-H)
5 - 90%
Storage relative humidity (H-H)
5 - 95%
Operating altitude
0 - 3000 m
Heat dissipation
55 BTU/h
Packaging data
Package width
430 mm
Package depth
360 mm
Package height
150 mm
Package weight
3.45 kg
Performance
Internal memory
256 MB
Flash memory
64 MB
Noise level
33 dB
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity
8
Basic switching RJ-45 Ethernet ports type
10G Ethernet (100/1000/10000)
SFP module slots quantity
2
Power
AC input voltage
100 - 240 V
AC input frequency
50 - 60 Hz
Power over Ethernet (PoE)
Power over Ethernet plus (PoE+) ports quantity
8
Total Power over Ethernet (PoE) budget
124 W
Power over Ethernet (PoE)
Security
DHCP features
DHCP client
Access Control List (ACL)
IGMP snooping
SSH/SSL support
Loop protection
BPDU filtering/protection
Weight & dimensions
Width
210 mm
Depth
275 mm
Height
42.5 mm
Weight
2.1 kg
The Allied Telesis AT-GS970M/10PS-30 is a managed L3 network switch from the CentreCOM GS970M series, specifically designed for use in network access environments. It features eight RJ-45 ports with 10G Ethernet support (100/1000/10000 Mbit/s) and two SFP slots for flexible high-speed connections. The integrated Power over Ethernet (PoE)+ function enables power supply to end devices such as wireless Access Points, IP surveillance cameras, or IP phones via the network cable, with a total PoE+ power budget of 124 W. The switch is designed for rack mounting and is suitable for use in server rooms or IT infrastructures where a compact and powerful network component is required.
Applications
The AT-GS970M/10PS-30 is suitable for use in medium to large networks, particularly in environments where central management of network devices and high bandwidth are required. The support for L3 functions such as static routing and RIP enables a flexible network architecture. The PoE+ function makes it especially suitable for applications in IP surveillance and wireless networks, as it allows end devices to be powered over the network, simplifying installation and reducing the number of required power outlets.
Functions and Features in Detail
The switch offers a routing/switching capacity of 20 Gbit/s and supports Jumbo Frames up to 10K, enhancing efficiency when transmitting large data packets. The MAC address table includes 16,000 entries, ensuring high scalability for networks with many end devices. The latency is 7.8 µs at 10–100 Mbps and 3.4 µs at 1 Gbps, ensuring low latency. The data packet buffer size of 1.5 MB supports data traffic processing under high loads. The VLAN support includes up to 2048 configurable VLANs, enabling fine-grained network segmentation.
Technology Explained Simply
The L3 functions enable routing between different network segments, allowing the switch to function not only as a bridge but also as a router. The port mirroring (RSPAN) allows monitoring of data traffic on a specific port by mirroring it to another port, which is useful for network diagnostics and security monitoring. The support for IEEE 802.1x/MAC/Web authentication enables controlled access control to the network. The access control lists (ACLs) and IGMP snooping contribute to network security and efficiency by reducing unwanted or inefficient data traffic.
Compatibility and Accessories
The switch is compatible with IEEE 802.2 and IEEE 802.3, ensuring use in standard-compliant networks. The SFP slots allow the use of SFP modules for fiber or copper connections, increasing flexibility in network connectivity. The support for IPv6 and SNMPv6 enables management over IPv6 networks. The AlliedWare Plus operating environment provides a graphical user interface (GUI) as well as command-line interface (CLI) management with context-sensitive help, simplifying configuration and maintenance.
Mounting and Installation
The switch is designed for rack mounting and can be installed in standard 19-inch racks. The front panel console port allows easy access for configuration via console. The power supply operates on AC 100–240 V, 50–60 Hz, with a fixed power supply connection featuring an EU plug. The operating temperature ranges from 0 to 50 °C, enabling use in indoor environments under normal conditions. The noise level is 33 dB, ensuring quiet operation.
Operational Advantages
The PoE+ function reduces the need for separate power supplies for end devices, simplifying installation and increasing flexibility. The L3 functions enable a flexible network architecture, while VLAN support ensures secure network segmentation. The support for Jumbo Frames and high routing/switching capacity ensure efficient data processing. The integrated diagnostic tools such as Ping polling, TraceRoute, and port mirroring simplify network monitoring and maintenance. The Eco-friendly modes allow turning off ports and LEDs to save energy.
Security
The switch offers comprehensive security features, including access control lists (ACLs), BPDU filtering, loop protection, and DHCP snooping. The support for SSH and SSL protocols ensures encrypted communication during management. The MAC address filtering and port-based learning limitations protect against unauthorized access and attacks. The authentication via IEEE 802.1x, MAC address, or web interface enables controlled network access control.
Management and Scalability
The switch supports the Allied Telesis Autonomous Management Framework (AMF), enabling centralized management and zero-touch installation. The CLI control with scripting functions and SNMP MIB support allows standardized network management. The SD/SDHC card slot enables storage of configurations, software updates, and other files, simplifying maintenance and backup. The configurable logs and triggers allow detailed logging of system events, including insertion and removal of SD cards.
Quality and Reliability
The switch is designed for use in professional environments and offers high reliability. The heat dissipation is 55 BTU/h, ensuring proper cooling of the device. The operating altitude is up to 3000 m, enabling use at high elevations. The storage temperature range of -25 to 70 °C and relative humidity of 5–95 % during storage demonstrate the robustness of the device. The weight of 2.1 kg and dimensions of 210 mm (width) × 275 mm (depth) × 42.5 mm (height) meet the requirements for rack mounting.