XT-NANO
The XT-Nano - Module is the latest network interface from our Embedded - series. With its extremely small dimensions of only 20 x 32 mm, it is particularly well suited to be integrated in very small terminals. With four switchable BUS - systems such as RS232, RS485, I2C and SPI, it meets all customer requirements. Even a POE (Power over Ethernet) supply is possible because all the necessary connections are made.
Power supply:
3.3Volt / 300 mA
POE Power Over Ethernet (pins running)

Dimensions
(W x D): 20 x 32 mm Interfaces Ethernet 10/100Mbps RJ45 Ethernet interfaces (TTL)





RS232
Geschwindigkkeit: 300-115200 baud
Data bits: 8bit 7
Parity: Odd, Even, Mark, Space, None
Signals: TXD, RXD, RTS, CTS, DSR, DTR, GND

RS485
Geschwindigkkeit: 300-115200 baud
Data bits: 8bit 7
Parity: Odd, Even, Mark, Space, None
Signals: TXD, RXD, RS485-RW

I2C
Geschwindigkkeit: up to 1.2MHz
Data bits: 8bit mode:
master mode
signals: SLC, SDA

SPI
Geschwindigkkeit: 12.5MHz
Data bits: 8bit
mode: master mode
signals: SCK, SS, MISO, MOSI IO TTL 6 TTL - IO Input or Output





Supported protocols
IP, TCP, UDP, FTP, SNMP, Telnet, ICMP, DHCP, DNS, DDNS, ARP, BOOTP, HTTP, HTML, DynDNS software functions


Modem - Emulation
- PAD emulation
ConnectOnData
AutoConnect
UDP keepalive
I2C master mode
SPI master mode
DynDNS